Blog Information

• Posted By : Ming rui
• Posted On : Apr 21, 2021
• Views : 108
• Category : General
• Description : Step 1 - Bottle Jack Purging air from hydraulic air bottle jacks is very similar to the process small trolley jacks use. Begin by loosening the release valve, and pumping the handle a couple of times. Step 2 - Bottle Jack Next, tip the bottle jack over so the oil fill plug is facing directly upwards and the unit is level.

Overview

• Step 1 - Bottle Jack
  Purging air from hydraulic air bottle jacks is very similar to the process small trolley jacks use. Begin by loosening the release valve, and pumping the handle a couple of times.

  Step 2 - Bottle Jack
  Next, tip the bottle jack over so the oil fill plug is facing directly upwards and the unit is level.

  Step 3 - Bottle Jack
  Slide the oil fill plug sideways with a flat screwdriver to allow air to escape. Be careful you don’t damage the plug doing so - as with all hydraulic jacks, you may need to repeat this process for the best results.

  Step 4 - Bottle Jack
  If you need to add oil to the bottle jack, make sure you completely remove the fill plug and fill the jack until oil is level with the filler plug hole when the jack is upright.

  We have aluminum tool boxes for sale and welcome to your come and purchase!