Blog Information

• Posted By : rixiang alex
• Posted On : Jun 17, 2021
• Views : 158
• Category : General
• Description : Two-color mold polishing has two main purposes: one is to increase the brightness and beauty of the mold; the other is to make the mold easy to demold. In the process of two-color mold processing, our Plastic Pail Mould polishing methods are as follows.

Overview

• 　　Two-color mold polishing has two main purposes: one is to increase the brightness and beauty of the mold; the other is to make the mold easy to demold. In the process of two-color mold processing, our Plastic Pail Mould polishing methods are as follows.

  　　1. Two-color mold mechanical polishing

  　　Mechanical polishing is a polishing method that relies on cutting and plastic deformation of the material surface to remove the polished convex parts to obtain a smooth surface. Generally, oil stone sticks, wool wheels, sandpaper, etc. are used, and manual operations are the main method. Special parts such as the surface of the rotating body can be Use the turntable and other auxiliary tools, and the ultra-precision polishing method can be used if the surface quality is high. Ultra-precision polishing is the use of special abrasive tools, which are pressed against the processed surface of the workpiece in a polishing fluid containing abrasives for high-speed rotation. Using this technology, the surface roughness of Ra0.008μm can be achieved, which is the highest among various polishing methods. Optical lens two-color molds often use this method.

  　　2. Two-color mold magnetic grinding and polishing

  　　Magnetic abrasive polishing is to use magnetic abrasives to form abrasive brushes under the action of a magnetic field to grind the workpiece. This method has high processing efficiency, good quality, easy control of processing conditions and good working conditions. Using suitable abrasives, the surface roughness can reach Ra0.1μm.

  　　3. Ultrasonic polishing of two-color mold

  　　Put the workpiece in the abrasive suspension and put it together in the ultrasonic field, relying on the oscillation effect of the ultrasonic to make the abrasive grinding and polishing on the surface of the workpiece. Ultrasonic machining has a small macroscopic force and will not cause deformation of the workpiece, but it is difficult to manufacture and install tooling. Ultrasonic processing can be combined with chemical or electrochemical methods. On the basis of solution corrosion and electrolysis, ultrasonic vibration is applied to stir the solution, so that the dissolved products on the surface of the workpiece are separated, and the corrosion or electrolyte near the surface is uniform; the cavitation effect of ultrasonic in the liquid can also inhibit the corrosion process and facilitate surface brightening.

  　　4. Two-color mold chemical polishing

  　　Chemical polishing is to make the surface microscopic convex part of the material in the chemical medium dissolve preferentially than the concave part, so as to obtain a smooth surface. The main advantage of this method is that it does not require complex equipment, can polish workpieces with complex shapes, and can polish many workpieces at the same time, with high efficiency. The core problem of chemical polishing is the preparation of polishing liquid. The surface roughness obtained by chemical polishing is generally several 10 μm.

  　　5. Electrolytic polishing of two-color molds

  　　Electrolytic polishing is basically the same as chemical polishing, that is, by selectively dissolving tiny protrusions on the surface of the material to make the surface smooth. Compared with chemical polishing, the effect of cathode reaction can be eliminated, and the effect is better.

  　　The electrochemical polishing process is divided into two steps: (1) Macroscopic leveling. The dissolved product diffuses into the electrolyte, and the geometric roughness of the material surface decreases, Ra>1μm. (2) Low light level. Anode polarization, improved surface brightness, Ra<1μm.

  　　6. Two-color mold fluid polishing

  　　Fluid polishing relies on high-speed flowing liquid and abrasive particles carried by it to wash the surface of the workpiece to achieve the purpose of polishing. Commonly used methods are: abrasive jet processing, liquid jet processing, hydrodynamic grinding and so on.

  　　Hydrodynamic grinding is driven by hydraulic pressure to make the liquid medium carrying abrasive particles flow back and forth across the surface of the workpiece at high speed. The medium is mainly made of special compounds (polymer-like substances) with good flowability under lower pressure and mixed with abrasives. The abrasives can be made of silicon carbide powder.

  　　We are a professional molding company, sell different design of mold, 18L Pail Mould is one of them,welcome to visit our website.