Blog Information

• Posted By : Jin hong
• Posted On : Jul 09, 2021
• Views : 163
• Category : General
• Description : Working temperature of Straight ejector pin is crucial because it affects the lifetime or durability of an ejector pin. For example, if the working temperature is high and the ejector pin being used is made for a low working temperature environment, then the ejector pins will certainly not last long. In the market, there are three common types of ejector pins: (1) through hard pins, (2) nitride H13 pins and (3) the newly developed black ejector pins. All of these pins are excellent to use; however, each has its own characteristics and is designed to be used in a specific environment.

Overview

• Working temperature of Straight ejector pin is crucial because it affects the lifetime or durability of an ejector pin. For example, if the working temperature is high and the ejector pin being used is made for a low working temperature environment, then the ejector pins will certainly not last long.

  In the market, there are three common types of ejector pins: (1) through hard pins, (2) nitride H13 pins and (3) the newly developed black ejector pins. All of these pins are excellent to use; however, each has its own characteristics and is designed to be used in a specific environment.

  Through Hard Pins
  The design of the through hard pins involves the same hardness throughout the diameter of the ejector pin. With this characteristic, the ejector pin can last much longer in working temperatures below 200oC. It is mainly suitable for plastic injection molds.

  Nitride H13 Pins
  If the working temperature goes beyond 200oC, then nitride H13 pins will be a much better fit. The reason is that the surface of these pin has a hardness of HRC 65 to 70, which can lead to a much better life expectancy in high working temperatures. These pins are best for die casting.

  Black Ejector Pins
  Nitride H13 pins are not suitable for working temperatures that exceed 600oC, so black ejector pins were developed as an option. These pins have a special black surface coating treatment on the entire pin that can sustain working temperatures up to 1,000oC. Also, the special black surface treatment provides additional self lubrication to the ejector pin, making it an excellent fit for automobile injection molding. These pins are suitable for most working temperatures, but the cost of such a pin is higher.

  If you want to purchase Injection plastic mold, welcome to send us messages!