Blog Information

• Posted By : stainlesskb112 afa
• Posted On : Aug 28, 2018
• Views : 406
• Category : General
• Description : How to clean Stainless Steel Bathroom Cabinet
• Location : Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China

Overview

• How to clean Stainless Steel Bathroom Cabinet :
  1. Be careful not to scratch the surface. Do not use a rough and sharp material to scrub the stainless steel surface, especially the mirror light. Use a soft, non-shedding cloth to scrub, sand and brushed surfaces. The lines are rubbed, otherwise it is easy to form a flower surface.
  2. Avoid using cleaning solutions containing bleaching ingredients and abrasives, steel balls, grinding tools, etc. To avoid residual cleaning fluid, corrode the stainless steel surface and rinse the surface with clean water at the end of the wash.
  3. The surface of the stainless steel is dusty, easy to remove dirt, can be washed with soap, weakly washed, adhesive ingredients, scrubbed with alcohol or organic solvent.
  4. Stainless steel surface contamination of grease, oil and lubricants, wipe with a soft cloth, then clean with a neutral detergent or ammonia solution or special detergent. The stainless steel surface is bleached and various acids are attached. Rinse immediately with water, soak in ammonia solution or neutral soda solution, then rinse with neutral detergent or warm water.
  5. The stainless steel surface has a rainbow pattern, which is excessive use of detergent or oil stain, washed with warm water.
  6. Corrosion caused by dirt on stainless steel surface can be cleaned with 10% or grinding detergent, or with special detergent. As long as we use the correct maintenance method, we can extend the life of stainless steel and keep it clean, bright and gorgeous.
  7. Stainless steel rust points are dry-ground using No. 0 water-grinding paper, but it is necessary to determine if it is rusting. If it is just a general smoke point, it should be removed with detergent or detergent. You can also soak it in water for one night, then use a small piece of 1000 water sandpaper and carefully wipe it with your fingers in the black area. Or buy 400 water sandpaper, soak it in water and gently grind it several times, then remove it. Do not use it vigorously to avoid crucibles. You can use a "clean cloth", decontamination powder and a small amount of detergent to erase the fine focus.