Blog Information

• Posted By : Lora wu
• Posted On : Oct 11, 2021
• Views : 200
• Category : Travel
• Description : NC machining has traditionally been thought of as a method for processing methods, which is still the case today

Overview

• NC machining has traditionally been thought of as a method for processing methods, which is still the case today. Modern industry, on the other hand, has been steadily increasing the precision requirements for parts made of all possible materials. This served as a motivation for the development of CNC plastic machining technologies. It has now carved out a significant niche in the production of high-precision, low-volume, and prototype plastic parts.
  
  We-WayKen can provide advanced CNC prototyping services, as well as high-temperature and high-strength plastic machining materials, for any plastic prototypes or customized parts, fusing of complex components, finishing and polishing services, and low-volume production.
  
  Wayken has been providing aluminum cnc machining service and fabrication of plastic components for global customers at competitive prices for more than 20 years. To learn more about how we can assist you in the beginning of your new project, please contact us today.
  
  The Factors That Influence the Popularity of Plastic Parts
  What is it about plastic that is so appealing? Since the invention of industrial-grade polymers, plastic has unabatedly infiltrated every branch of modern industry, with no signs of abating. There are a variety of reasons for this. I'll limit myself to naming only the three most important reasons. Plastic parts are inexpensive, lightweight, and long-lasting. Let's start with the first point. By "cheap," I mean that the cost of manufacturing them is significantly lower than the cost of manufacturing metal components.
  
  CNC Plastic Machining Techniques
  High precision plastic parts can be manufactured using a variety of methods. Modern industrial-grade plastics are cast, injection-molded, printed, or machined, depending on their application. When cnc milling comes to manufacturing complex geometry parts with a fine surface finish, the first three options are excellent choices. However, whenCNC machining metal  comes to achieving a tight tolerance or producing a mirror-like surface finish in almost any type of part, there is nothing better than machining. CNC milling is used for approximately 80% of the plastic parts. It is the most widely used method for producing parts that do not have a revolution axis. All of the remaining parts are typically turned on a lathe. Slotting or planning may be used in some instances. The majority of the time, inner grooves or rectangular holes are manufactured. CNC machined parts are polished or chemically processed in order to achieve a high-quality surface finish.
  

  CNC Plastic Components
  WayKen's CNC equipment is ISO certified and capable of performing a wide range of services, including milling, turning, drilling, sanding, grinding, punching, tooling, and welding. We are capable of producing high-performance plastics from a variety of materials in the form of sheets, round rods, and other shapes.
  
  Tips for Using Plastic Machining Machines
  First and foremost, let us set the record straight. There are no CNC machines for plastic production. All of the machine tools that are used to cut plastic are, in fact, metal machining equipment. In addition to their precision rigidity and power output, they are capable of processing even hardened plastics with ease. It is important to note that woodworking machine tools will not perform as well as hand tools because their rigidity is lower.
  
  Knife and Sword Cutting Instruments
  Selecting the most appropriate cutting tools for plastic parts is a difficult task. Plastic and composite materials, in particular, have a highly variable chemical composition, which explains this. Some plastics are reinforced with hard carbide particles, while others contain additives that improve flexibility, thermal resistance, or a variety of other characteristics. All of this has an impact on how a plastic reacts to machining. Even the colorant of the material is important because, depending on the type of material, the tint may change during machining as a result of the high temperatures involved.
  
  As a result, it becomes clear that selecting the proper cutting tool geometry for the machined plastic parts is essential. For example, milling tools are similar to aluminum cutters with two flutes; however, the sharp edges have sharper angles than aluminum cutters. Drills are a good example of this. Their main angle, which is 120 degrees for metals, is reduced to 60 degrees for plastics. The chips are smaller as a result, and they can be removed more easily. Metals, on the other hand, cannot be drilled with that kind of drill. It will be destroyed in a matter of minutes.
  
  Setup of the Part
  Keep this in mind as you set up your CNC plastic blocks. Plastic does not have the same properties as metal. If you clamp the blank with too much force, you can easily leave a large mark on the surface. In fact, if you apply too much force to the part, it will most likely just crack. If you want to avoid any marks on the part, it is recommended that you use special pads made of a softer material between the fixtures and the part. Another problem is a certain amount of rigidity. Take, for example, drilling a large part with a lot of width (think of metal CNC machining as a notebook case). Maintain close track of how far the drilling location is from the fixtures. During the process, the drill will attempt to pull the part up along its flutes, and if the fixtures are too far away, the drill will fail. It will either bend or tear the part away from the fixtures, depending on the severity of the impact.
  
  The Cutting Parameters are a set of parameters that are used to cut a piece of paper.
  Let's take the example of the CNC Milling Plastic Case to examine the various options for plastic cutting processes. The most important thing to watch out for is excessive friction and plastic deformation of the part, rather than cuttingSwiss CNC Machining. To avoid the second problem, always keep your cutters sharp, and if the material you're working with isn't rigid enough, freeze Precision CNC Machining. Low temperatures cause plastic to become hard and brittle.
  
  When working with a CNC machined part, it's important to keep the tool moving and avoid allowingCNC Machining Prototype to sit in one spot for an extended period of time. Remove the chip as quickly as possible. As a result, the feeds for plastic processing must be large, even aggressive. As a result, the spindle speeds must be increased in order to accommodate the increased feed rate. The approximate estimation is that the aluminum feeds and the corresponding cutting speed are approximately three times as fast as the aluminum feeds.
  
  Plastics and their Applications in CNC Prototyping
  Plastic machining services are closely associated with the art of CNC prototyping. Polymer materials are ideal for the creation of prototypes and the verification of engineering designs. A significant reason for this is the fact that plastics are incredibly simple to machine. If you don't have access to heating or molding equipment, creating prototypes from CNC plastic blocks is a simple and quick way to get those prototypes out the door. You can use the same widely used equipment that is used to process metals, which allows for a high degree of flexibility. Cutting speeds and feeds will be significantly faster, resulting in shorter lead times and the ability to test your product samples more quickly and introduce them to the market before your competitors.