Blog Information

• Posted By : wistar motor
• Posted On : Dec 14, 2021
• Views : 84
• Category : General
• Description : Tubular Motor Manufacturers introduces the wiring method of the motor:

Overview

• Tubular Motor Manufacturers introduces the wiring method of the motor:

  1. The power supply adopts DC positive and negative voltage to the ground. VDD is the forward voltage of DC motor to the ground; the reverse voltage of DC motor to ground; The ground is DC ground, not AC ground.
  2. The power supply voltage directly adopts DC positive and negative voltage, VDD to ground is the forward voltage of DC motor; Vss is the reverse voltage of DC motor to the ground; Ground is DC ground, not AC ground.
  3. The power supply voltage directly adopts DC positive and negative voltage, is the positive pole of DC voltage;-is the negative pole of DC voltage.
  4. Pay attention to the installation, please install the relay next to the curtain motor, and the address setting and use of the curtain controller are still the same. In addition, please refer to the corresponding manual for the adjustment of the stroke.

   

  Through the above introduction,AC Tubular Motor Manufacturers hopes that you can simply refer to the content of this article in future use.