Blog Information

• Posted By : Alex Carey
• Posted On : Dec 05, 2022
• Views : 123
• Category : General
• Description : Did a water main burst on your property? How long will it take to fix? What is the repair like? Read here to learn the process and some things you need to do.
• Location : Sacramento, CA, USA

Overview

• It’s a normal day at your home when you suddenly notice water flooding an area of your property. Either your lawn is flooded, or your basement, or you notice water down the road from your home. Your water main has burst. This can be an extremely stressful situation, especially since it’s one that you have likely never had to handle before. So, what do you do? Keep reading to find out.
  
  

  Call for Help

  The first thing you should do is call a water main repair specialist close to you, or report to management in your area if you are renting. It’s extremely important that these bursts are repaired as soon as possible to prevent extensive damage and save water. Main line repair specialists are everywhere. It’s as simple as looking up someone on the internet in your area. But if you aren’t quite sure, then look up emergency lines for the city you live in. There will be a department specifically for main line systems.
  
  

  The Process of Repairing a Line

  Now that someone has shown up to handle the problem, you’re probably wondering what the process is like. Will it cause more damage to your property? Will it take a long time to fix? Will you be without water for a while? It’s actually quite straightforward, so there’s not much to worry about. Most repairs actually only take between 6 and 8 hours!

  1. Redirect the water. The city will redirect the water from the damaged line so that there is no disturbance in the city. This way, they can also check for clogs or any other potential bursts in the pipe without issue.
  2. Pinpoint the problem. If the leak isn’t evident, then the repairmen will start looking for it. If it’s on the road or sidewalk, then they’ll start pulling it apart to find the leak and repair it. Leaks in these areas are usually a problem for the city. If the leak is discovered past your property line, it will be your responsibility.
  3. Fix the pipe. Once the issue is pinpointed, they’ll repair the pipe by either patching it, or taking out that section of pipe and putting in a new one. It all depends on how bad the damage is.
  4. Seal up damage. The pipe’s fixed! Now they’ll re-lay concrete or fix the road or lawn. Roads can take longer to repair, but they’ll ensure it’s as clean as possible for convenience. The water can once again flow through the pipe as well.

  
  Aftermath

  Once the pipe is fixed, it’s suggested that you run every water outlet you can to make sure things are working properly. This includes sinks, washing machines, and so on. If there’s an issue, call a specialist to take a look. Just look for main line repair in Sacramento, CA, to find a specialist in handling these kinds of leaks. While the situation can be scary, professionals make the process of repair as easy as possible!