Blog Information

• Posted By : Gold Eagle
• Posted On : Feb 04, 2021
• Views : 116
• Category : General
• Description : In the automated production line, to make a good process layout, it is necessary to conduct on-site inspections, use scientific methods to collect data and information on the production line, use the collected information to draw the process layout, and analyze the information effectively Make reasonable layout of the workstations on the automated production line, and pay attention to consider from the overall perspective, and pay attention to the integration, standardization, scientification and rationalization of the workstations.

Overview

• 1. In the automated production line, to make a good process layout, it is necessary to conduct on-site inspections, use scientific methods to collect data and information on the production line, use the collected information to draw the process layout, and analyze the information effectively Make reasonable layout of the workstations on the automated production line, and pay attention to consider from the overall perspective, and pay attention to the integration, standardization, scientification and rationalization of the workstations.
  2. In terms of process layout, it is also necessary to consider factors such as wire control wiring method and power supply. Wire control wiring is mainly routed on the land surface and in the air. In the actual wiring process, it is necessary to have Experienced staff consider factors such as control lines and trunking to minimize resource loss, save costs, and focus on improving efficiency.
  3. When designing pneumatic control, pay attention to factors such as the lifting and rotation of the station. In the automatic production line, when designing the pneumatic schematic diagram, learn to use the operating method of the workstation and fully consider the control of the pneumatic system. If the system stops due to gravity or other factors, the solution that needs to be provided is to add a control check valve. This method can avoid greater disasters, so as to avoid unbearable consequences for the enterprise and reduce the loss of the enterprise.
  4. When analyzing the pneumatic schematic diagram, pay attention to factors such as lifting and rotation of the station. In the automatic assembly line, when designing the pneumatic schematic diagram, learn to use the operating method of the workstation and fully consider the control of the pneumatic system. , If the system stops due to gravity or other factors, the solution that needs to be provided is to add a control check valve to avoid uncontrollable situations and make the automated assembly line operate normally, safely and reliably.

  We wholesale can making machinery production line and welcome to your come and purchase!