Electric Motorcycle Factory introduces the tips for using battery car batteries:
The faster the battery car travels, the shorter the mileage; the shorter the battery life.... moreElectric Motorcycle Factory introduces the tips for using battery car batteries:
The faster the battery car travels, the shorter the mileage; the shorter the battery life. Recommendation: Drive at a medium speed
The longer the battery car's mileage each time, the shorter the battery life. Suggestion: charge at half the battery
The more the load of the battery car, the shorter the mileage; the shorter the battery life. Recommendation: Don't be overweight or overloaded4. The lower the temperature of the battery car is, the shorter the mileage of the car and the shorter the battery life. Recommendation: Do not charge in the open
The shorter the battery charge turns to the green light, the shorter the mileage and the shorter the battery life. Recommendation: Replenish water every 6 months.
Through the above introduction, High Power Electric Motorcycle Manufacturers hopes that you can simply refer to the content of this article in future use. less
Electric Motorcycle Factory introduces the causes and hazards of sulfation of lead-acid batteries?
Lead sulfate is highly active for a period of time after it is formed. If it is... moreElectric Motorcycle Factory introduces the causes and hazards of sulfation of lead-acid batteries?
Lead sulfate is highly active for a period of time after it is formed. If it is not charged in time or is not fully charged during this period of time, so that it is not converted into positive and negative active materials in time, lead sulfate will recrystallize when the temperature is low. Precipitating on crystalline lead sulfate, this is repeated again and again, so that the crystal particles continue to grow, becoming lead sulfate crystals that are poor in conductivity, difficult to dissolve, and difficult to recover when charging, which is commonly referred to as irreversible salinization.
There are many reasons for battery failure, such as fatal corrosion of the electrode grid, severe deformation of the electrode grid, shedding of electrode active material, internal short circuit or open circuit of the battery, and other physical and chemical reasons. However, statistics show that most battery... less
Electric Motorcycle Factory introduces 3 ways to properly maintain electric vehicle batteries:
First, do not expose electric vehicles and batteries
High temperature will put a lot... moreElectric Motorcycle Factory introduces 3 ways to properly maintain electric vehicle batteries:
First, do not expose electric vehicles and batteries
High temperature will put a lot of pressure inside the electric vehicle, and at the same time it can force it to open automatically, increasing the amount of water loss, and the loss of water in the electric vehicle battery has a great impact on battery activity. We all know that the reason why electric vehicle batteries can ride people is mainly based on their own chemical reactions. If the active material lacks activity, then chemical reactions cannot proceed. Eventually, the electric vehicle battery capacity will be reduced and the effect will be damaged. In addition, exposure to the sun can also cause excessive heating of the shell, bulging, deformation, etc., which are fatal to the damage of the electric vehicle battery.
Second, charge correctlyDo you know the correct way to charge the battery of an electric car? I believe many people will sneer, but... less
Electric Motorcycle Factory introduces the difference between lead-acid batteries and lithium batteries:
The lead-acid battery pack weighs 16-30 kg and has a relatively large... moreElectric Motorcycle Factory introduces the difference between lead-acid batteries and lithium batteries:
The lead-acid battery pack weighs 16-30 kg and has a relatively large volume; while the lithium battery generally weighs 2.5-3.0 kg and is relatively small, so it is light to ride and easy to carry. From the quality point of view , it is difficult to define the quality of the two, but consumers can buy good quality batteries produced by regular manufacturers according to their actual needs.
The cost of main materials such as cathode materials, anode materials, current collectors, separators, and electrolytes of lithium batteries is much higher than that of lead-acid batteries. The cost of assembly auxiliary materials and external circuit systems for lead-acid batteries is extremely low.
Due to the manufacturing process, the labor cost of lithium batteries is relatively large. In the manufacturing cost, the labor cost of lithium batteries accounts for more than 40%, while the labor cost of lead-acid... less
There are many reasons for the spontaneous combustion of electric vehicles. Accidental collisions and leakage of electrolyte in the battery can cause accidents. The more common... moreThere are many reasons for the spontaneous combustion of electric vehicles. Accidental collisions and leakage of electrolyte in the battery can cause accidents. The more common ones are the short circuit caused by the friction or collision of the positive and negative lines of the battery. In order to avoid similar situations and eliminate potential safety hazards in time, Electric Motorcycle Factory has compiled the following 5 points:
1. When buying a car, choose an electric car with a production license, a well-known market, and a well-known brand. Check whether the electric car has Undervoltage, overcurrent protection, and short-circuit protection functions, read the product manual, and operate according to the manual;
2. Except for the first charge, the charging time should not exceed 8 hours in principle. When charging, standardize the wiring and limit the time. The charger should be placed in a place where heat dissipation is easy. Charging for a long time will cause the battery to heat up, and... less
Electric Motorcycle Factory shares the principle of battery charge and discharge:
1. The process of charging the battery of an electric bicycle: by inputting electrical energy,... moreElectric Motorcycle Factory shares the principle of battery charge and discharge:
1. The process of charging the battery of an electric bicycle: by inputting electrical energy, the lead in the battery liquid is reduced to metallic lead to store electrical energy.
2. The discharge process of the electric bicycle battery: the chemical reaction between the metal lead and the electrolyte becomes ionic lead and releases electric energy.
Electric Motorcycle Factory introduces why it is necessary to charge the battery before using it for the first time?
Although the battery of an electric vehicle is charged when... moreElectric Motorcycle Factory introduces why it is necessary to charge the battery before using it for the first time?
Although the battery of an electric vehicle is charged when it is first used, it does not mean that it can be used directly.
Because all batteries will be stored for one to two months after they leave the factory, during this period of time, there will be some reactions inside the battery, consuming part of the power, and thus cannot reach the required rated capacity. If used at this time, it will The battery causes a certain amount of damage, but after the first use of charging, it can not only protect the safety of the battery, but also prevent customers from thinking that the battery is insufficient. less