Now in this rapid era of modern development, it is often not up to the pace of the times. Now the modern production of agriculture is the most effective example of modern... moreNow in this rapid era of modern development, it is often not up to the pace of the times. Now the modern production of agriculture is the most effective example of modern development. From the advanced design and conception of the Seed Planter, the modern development and changes are fully reflected. Now we will introduce the maintenance and maintenance of the seed planter.
(1) Before working, the seed planter shall fill the oil filling points in time to ensure sufficient lubrication of the running parts. Missing or damaged parts shall be supplemented, replaced and repaired in time. Be careful not to oil the gears and chains so as not to stick mud and increase wear. (2) All rows of wheels have the same working length and the same displacement. The seeding rate adjustment mechanism of the seed planter is flexible and can not slide or empty. (3) The disc of the disc opener rotates flexibly and cannot shake, and does not rub against the opener body. (4) Before, after and during the work... less
All parts of the Seed Plantermust be cleaned of dirt. Remove the seeds and fertilizer from the fertilizer box. In particular, the fertilizer box should be washed and dried... moreAll parts of the Seed Plantermust be cleaned of dirt. Remove the seeds and fertilizer from the fertilizer box. In particular, the fertilizer box should be washed and dried with clear water, and then anti-corrosion paint (except plastic box) should be applied to the box.2. Check the seed planter for damaged and worn parts, which can be replaced or repaired if necessary. If there is any paint removed, repaint it.3. After the new seed planter is used, if disc opener is selected, the opener shall be removed, the outer cone, disc hub and linoleum shall be washed with diesel oil or gasoline, coated with butter, and then installed. If there is deformation, it should be leveled. If the gap between the gathering points of the disc is too large, the adjustment can be made by reducing the adjusting shim between the inner and outer cones.4. Clean up the soil working parts (such as furrow opener and furrow builder) and coat them with butter or waste engine oil to avoid rusting.5. The seed planter shall be... less
The correct installation of the Seed Planter is the key to safe use. How to install the seed planter correctly?1. Check whether the front bumper of the tractor is horizontal when... moreThe correct installation of the Seed Planter is the key to safe use. How to install the seed planter correctly?1. Check whether the front bumper of the tractor is horizontal when using the seed planter. If it is not horizontal, correct it before installing the lifting frame.2. The connection between the main machine of the seed planter and the lifter is through four U-shaped cards on the main machine and two front supports on the lower part of the lifting frame. The two U-shaped cards on the upper part of the lifting frame are connected with the lifting frame through four cylindrical pins and two movable lifting plates.3. The diesel engine and the gearbox of the harvester are connected with two B-type V-belts. After installation, do not press the tensioning wheel too tightly. Under normal harvesting conditions, as long as the V-belts do not slip.4. Mount the lifting frame on the safety rod of the tractor, then press the lifting frame with a pressing plate through screws, and then connect one end of... less