Although the filter of Stainless Steel Faucets is often used in every household, do you know that the filter of the faucet is often used and washed by water, it will accumulate...MásAlthough the filter of Stainless Steel Faucets is often used in every household, do you know that the filter of the faucet is often used and washed by water, it will accumulate many impurities in the water, and a layer of sediment will adhere to it over time Above, it is difficult to clean. It is assumed that if it is not cleaned in time, it will block the faucet and even cause the faucet filter to be washed off. Then, we must clean up in time, get rid of debris, and insist on dredging the faucet filter.
Kitchen Faucets Manufacturers Introduces the process of cleaning the filter of the faucet is:1. Clean the faucet and filter on time according to household practice.
There are two flat surfaces at the outlet of the faucet that can be twisted with a wrench, that is, unscrew the faucet to take out the inner filter, rinse with clean water, and then gently rinse with a toothbrush dipped in mild liquid detergent or toothpaste.
The filter can also be soaked in white vinegar for 4-6 hours and then used to flush... Menos
Kitchen Faucets Manufacturers introduces what is in-wall faucet and pull faucet
1. The wall-mounted faucet has a very high appearance value, but because its position is fixed, it...MásKitchen Faucets Manufacturers introduces what is in-wall faucet and pull faucet
1. The wall-mounted faucet has a very high appearance value, but because its position is fixed, it is not convenient to replace and maintain it. It is necessary to measure the size before installation. It is very cool to install in the bathroom. The gap between the faucet and the sink and washbasin is prone to dirt due to long-term accumulation of water, and the wall-mounted faucet does not have the problem of sanitary corners, which saves a lot of time to clean the faucet.
2. Pull-out faucet. The pull-out faucet that can rotate 360 degrees to spray water looks the same as an ordinary faucet, but the front water outlet can be pulled out entirely. The advanced faucet can be switched by pressing the button and can be operated with one hand, which is more convenient.
Through the above introduction, Stainless Steel Faucets Manufacturers hopes that you can simply refer to the content of this article in future use. Menos
Kitchen Faucets Manufacturers introduces how to solve the problem of water leakage
1. The faucet still emits water after the valve core is closed. This phenomenon may be caused by...MásKitchen Faucets Manufacturers introduces how to solve the problem of water leakage
1. The faucet still emits water after the valve core is closed. This phenomenon may be caused by the loosening of the pressure cap causing the valve core to become loose and unable to seal the water. The solution is to remove the handle and the decorative cover, and tighten the pressure cap again. Another possibility is that the rubber ring at the bottom of the valve core is deformed. Can not seal the water, the solution is to take out the valve core, check the bottom rubber ring, reset it and reinstall it.
2. Water seeps from around the valve core. This phenomenon may be caused by loose or displacement of the spool. The solution is to remove the spool and install it again.
The above content is organized and shared by Lavatory Cabinet Manufacturers, hoping to help those in need. Menos
How to maintain the stainless steel faucet is a big learning, kitchen faucets manufacturers to talk about kitchen faucets manufacturers cleaning method:1, the surface needs to be...MásHow to maintain the stainless steel faucet is a big learning, kitchen faucets manufacturers to talk about kitchen faucets manufacturers cleaning method:1, the surface needs to be cleaned regularlyProper use, and then regular cleaning of the surface of the stainless steel faucet can extend its life and keep it as bright as new. It is best to clean the faucet once every other month. The usual cleaning with water can wash away the stains on the surface, and then dry with a soft rag. If the deposited dirt is stubborn, it can also be cleaned with a mild liquefied detergent or a colorless glass cleaner. Do not use acidic, abrasive cleaners to avoid damaging the surface of the stainless steel faucet and affecting the appearance.2. Focus on the internal cleaning of the faucetThe surface of the faucet is cleaned for aesthetics, and internal cleaning is the main factor affecting the service life. If you find that the faucet has a reduced water volume or a water fork, it means that the faucet's bubbler is clogged. At... Menos
Usually, when we clean at home, we often ignore many dead corners in the house, such as small items such as faucets. Then how to properly clean up, the following kitchen faucets...MásUsually, when we clean at home, we often ignore many dead corners in the house, such as small items such as faucets. Then how to properly clean up, the following kitchen faucets manufacturers will share the experience for you.The actual operation of the cleaning faucet is very simple, just need a bottle of white vinegar. The softening effect of white vinegar is very good. White vinegar has been cleaned in many parts of the house. The strong acidity of white vinegar can quickly soften and stain stains. After softening, wipe gently with a rag. The specific method is to use a paper towel to immerse in white vinegar, then cover the vinegar in a dirty place and wait for ten minutes.After ten minutes, remove the paper towel and wipe it off with a slightly hard brush or rag. The scouring pad is also available, and the cleaning effect is very good. This method is ideal for cleaning stubborn stains on faucets. The cleaning effect is low and the cost is low. Interested friends can try it.In fact, in addition to the... Menos
The easy place for the faucet is the valve core, so it is necessary to master its replacement skills. Once the faucet leaks, it will not only waste water resources, its water...MásThe easy place for the faucet is the valve core, so it is necessary to master its replacement skills. Once the faucet leaks, it will not only waste water resources, its water droplets and long-term effects on the humidity of the space will be healthy for the family. Then when there is a problem with the faucet spool, how do you change the faucet spool? The following kitchen faucets manufacturers will teach you how to replace it:1. Close the total water valve first.2. Then put a red and blue mark of about 8 mm on the handle of the faucet and buckle it down.3. Use a flat-blade screwdriver to loosen the set screw counterclockwise and remove the handle to expose the spool.4. Use a spanner wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and remove the ceramic valve inside.Faucet spool replacement notes:1. After removing the spool, you will see a blue rubber band on the bottom of the spool. It is customary to have a red eraser at the bottom of the left spool and... Menos
Today, follow the kitchen faucets manufacturers to identify the quality of the stainless steel sink:1, the thickness of the stainless steel sinkGood stainless steel sinks use...MásToday, follow the kitchen faucets manufacturers to identify the quality of the stainless steel sink:1, the thickness of the stainless steel sinkGood stainless steel sinks use thicker plates, good quality sinks with imported 304 stainless steel plates and a thickness of 1 mm, while ordinary low-grade sinks use 0.5 mm to 0.7 mm. Since the sink has been edge treated, it is difficult to see the thickness at once. The easiest way is to press the surface of the sink a little bit. If it is pressed down, it means the material is very thin. Of course, if you can borrow the vernier caliper and the spiral micrometer, don't It’s so troublesome.2, the sink surfaceCareful observation of the stainless steel sink, we can find that the surface of the good quality sink is flat, the visual gloss is soft, not easy to stick to oil, easy to clean and wear-resistant. The inner corner of the good quality sink is close to 90 degrees, the inside of the sink is larger, and the volume of the basin is also large.3, stainless steel... Menos
Today, kitchen faucets manufacturers to share what is the kitchen faucet filter1. Some stainless steel faucets have a filter installed on the head. The filter consists of two...MásToday, kitchen faucets manufacturers to share what is the kitchen faucet filter1. Some stainless steel faucets have a filter installed on the head. The filter consists of two layers. When you screw it down from the faucet, you will find a lot of small sand on it. This is the filter. The role of the device, if there is no two layers of filters, sand will directly enter our food, damaging our health. 2. Rotate the faucet to the left to unscrew the filter.3. After the filter is screwed down, take it in your hand and remove the large sand particles. If you can't take it, you can put it on a nearby chopping board or something else and pry off the small sand.4. Rinse under the faucet with water and rinse both sides. After rinsing, use a cleaning ball to wipe off the dirt and dust around the filter, and then take it under the faucet to prepare for installation.5. When installing, align the screws with the screws on the faucet, buckle the faucet, and start to turn to the right. Maybe once.
information about kitchen... Menos
In the home decoration, there are many owners and friends who do not know much about the skills of the old house. The following kitchen faucets manufacturers will introduce you to...MásIn the home decoration, there are many owners and friends who do not know much about the skills of the old house. The following kitchen faucets manufacturers will introduce you to the tips of decorating old houses:1. Hydropower transformationSince it is necessary to renovate the old house, it is sure to change things all at once. The water circuit of the old house is the most complicated and critical. I used galvanized pipes in this house. I expected all the rust when I opened them. So I changed the main pipe from the main pipe. Although I have not changed the sewer, I have to pay attention. If you want to change it, check if the old pipe is unobstructed and proceed to the next step. After the waterway is completed, don't forget to test the pressure on the water pipe. After I got the waterway, I started working on the circuit again. I didn't know what it was. I was really annoyed when I got it. It was hard to set up the circuit into 3-4 sets of loops that are now routinely used. Small houses, guaranteed to... Menos
There are many types of faucets, such as common basin faucets, bathroom faucets, kitchen faucets, push-type faucets, inductive faucets, washing machine faucets, bubbler faucets,...MásThere are many types of faucets, such as common basin faucets, bathroom faucets, kitchen faucets, push-type faucets, inductive faucets, washing machine faucets, bubbler faucets, etc.Today, kitchen faucets manufacturers sort out some common faucet disassembly methods:1. Old-fashioned iron faucet disassembly methodPrepare the adjustable wrench, then point the adjustable wrench to the connection between the faucet and the water pipe, then rotate the faucet counterclockwise to disassemble the faucet. This old-style faucet is generally easier to disassemble, and there is no filter element inside. Rotate down in a counterclockwise direction.2, ordinary faucetThis kind of faucet is also a common faucet. If the faucet is to be disassembled, basically connect the hose. This is a conventional screw. You can use a spanner wrench or a fixed wrench to remove the faucet. After the joint is removed, Then remove the front mouth of the faucet. If the faucet wants to continue to disassemble, it is basically the rotating... Menos
If the faucet is not cleaned, it will also cause dirt, and it will also affect the use time of the faucet. Therefore, the correct cleaning of the faucet is very important. The...MásIf the faucet is not cleaned, it will also cause dirt, and it will also affect the use time of the faucet. Therefore, the correct cleaning of the faucet is very important. The faucet is dirty and ugly? kitchen faucets manufacturers 4 small methods, clean and maintenance, clean as new.The first one is a copper faucet. The surface of this faucet is plated with a layer of copper, so it is a relatively high-grade faucet. Usually you can use boiling water when cleaning, add some cleaning agent inside, or use some degreaser detergent directly, wipe it directly, it is as simple as that.The second case is a rusted faucet. Because some faucets are not very good in quality, or if they have not been used for a while, the faucet will easily rust, which will definitely affect the appearance of the faucet. And used. At this time, you can use a sponge to apply some detergent to scrub. After cleaning, rinse with water and finally dry it with a clean cloth.The third is to use toothpaste to clean the faucet. For example, use... Menos
When the faucet is used for a while, the water flow will become smaller or no water! Most are caused by blockage of impurities in tap water! The blockage position generally...MásWhen the faucet is used for a while, the water flow will become smaller or no water! Most are caused by blockage of impurities in tap water! The blockage position generally appears in the place where the filter is located and the pipe is suddenly tapered.kitchen faucets manufacturers to share which two places are easy to block:1 Bubbler: A bubbler is a device that has a water-flow foaming effect and saves water. The bubbler can fully mix the water and air flowing through. With the addition of air, the flushing power of the water is increased a lot, thereby effectively reducing the water consumption and saving water.The faucet with the bubbler is like a mist, soft and comfortable, and the impurities in the water are filtered, and it will not splash around. This is the function of the bubbler.The bubbler filter filters out impurities in the water, which can block the water outlet for a long time.2 hose connection connector:Special reminder: The bubbler may not be disassembled. It is recommended that the... Menos
The basin faucet is a common hardware tool in our daily life, and it is indispensable for daily washing. The basin faucets on the market can be divided into single-handle...MásThe basin faucet is a common hardware tool in our daily life, and it is indispensable for daily washing. The basin faucets on the market can be divided into single-handle single-hole faucet, single-hand double-hole faucet, double-handle single-hole faucet and double-handle double-hole faucet. It is just a matter of picking the eye, not to mention the installation. Next, follow the kitchen faucets manufacturers to see how to install the basin faucet. For the two-hole and single-hole basin faucet styles, pay close attention to the details.First, the installation steps of the single-hole basin faucet are simple: connect the inlet hose and the basin faucet inlet port; connect the inlet hose and the outlet angle valve.1. After buying the faucet, first check whether the fastening parts contain the following basic parts: one copper washer, two rubber washers, and one fastening nut.2. Put two water inlet hoses on top of each other with rubber washers and copper washers. The basin is a ceramic basin. The rubber... Menos
Stainless steel faucet is a kind of faucet, and it is also used more. How to maintain and clean stainless steel faucet? Let's take a look at Afa kitchen faucets manufacturers .1....MásStainless steel faucet is a kind of faucet, and it is also used more. How to maintain and clean stainless steel faucet? Let's take a look at Afa kitchen faucets manufacturers .1. Before installing the faucet, you need to flush the water, wash the impurities in the water pipe, remove the debris in the installation hole, install the faucet as much as possible after the completion of the painting project. If it is not used for a long time after installation, it is best to clean the faucet. The cloth is covered.2. The faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface to avoid damage to the surface sand.3. Switch the faucet not too hard, just gently roll it, especially don't use the handle as a handrail to support or use.4. The faucet should be wiped on schedule to prevent the watermark from leaving after the water droplets dry.5. The shower head metal hose of the bathtub faucet should be kept in a natural stretch state. Do not coil it on the faucet when not in... Menos
The bathroom area is not large, but the space distinction has a lot of attention, especially the distinction between wet and dry areas is not negligible. At this moment, the...MásThe bathroom area is not large, but the space distinction has a lot of attention, especially the distinction between wet and dry areas is not negligible. At this moment, the wonderful planning of the interval has come in handy. Here, Afa kitchen faucets manufacturers will introduce 8 bathroom spacing plans for us to appreciate the charm of the small bathroom space.
The bathroom is divided into two areas, and the semi-open space is the dividing line. Appropriate addition and subtraction planning are used for the interval: the wall between the bathtub and the bathroom cabinet is relatively high to one-half of the space, and the damp bathtub is separated from each other to properly care for the shading; the other half is the glass door. Planning. All the intervals are kept in place, which not only provides isolation but also ensures a wide sense of the bathroom.
The small block spacing plan properly separates the toilet area from the wash area to create a small compartment. The beautiful striped wallpaper on... Menos
If there is a leak in the kitchen, it will be very troublesome, so it is necessary to take precautionary measures, but the biggest possibility is that the water pipe is broken....MásIf there is a leak in the kitchen, it will be very troublesome, so it is necessary to take precautionary measures, but the biggest possibility is that the water pipe is broken. Once the water leakage problem is found, the valve to close the water is necessary, then Looking for the reason, what about the kitchen leaking? What are the reasons for the kitchen leak? The kitchen faucets manufacturers belowLet me introduce it to you.
First, how to do kitchen leaks1. The solution for water leakage in the sink: In addition to the plastic tube, there is a sink and a tabletop connector, as well as a sink drain. This situation is generally not sealed, we can go by ourselves. Buy a tube of glass glue outside and hit it yourself. If you find a leak, you can solve it yourself. In addition to this method, you can also wrap the tape along the tube and wrap it up. The water leak in the sink is because the drain of the sink is usually plastic, so it is easy to break, and sometimes it will break if not noticed.