This website uses cookies to ensure you get the best experience on our website.
To learn more about our privacy policy Click hereThe correct installation of the Seed Planter is the key to safe use. How to install the seed planter correctly?
1. Check whether the front bumper of the tractor is horizontal when using the seed planter. If it is not horizontal, correct it before installing the lifting frame.
2. The connection between the main machine of the seed planter and the lifter is through four U-shaped cards on the main machine and two front supports on the lower part of the lifting frame. The two U-shaped cards on the upper part of the lifting frame are connected with the lifting frame through four cylindrical pins and two movable lifting plates.
3. The diesel engine and the gearbox of the harvester are connected with two B-type V-belts. After installation, do not press the tensioning wheel too tightly. Under normal harvesting conditions, as long as the V-belts do not slip.
4. Mount the lifting frame on the safety rod of the tractor, then press the lifting frame with a pressing plate through screws, and then connect one end of the two diagonal flat irons to the lifting frame while the other end is connected and fixed with a connecting seat welded on the tractor girder. Ensure the machine has good stability.
After the assembly is completed, it should run idle for 5 minutes and then run at high speed for 6 minutes. After checking that there is no abnormality in each component, it can be operated in the field. The adjustment of stubble cutting height is realized by the adjusting screw of the lifting frame. Before harvesting, adjust the cutting knife to contact the soil ground, then lock the screw for trial cutting to see if the stubble cutting is suitable. If not, adjust again to meet the requirements before harvesting.