The position of the water pipe in the house, does it appear every time after the bowl is brushed? This is obviously already tightened, but it is still a problem of dripping. How much money was wronged. I believe that many people have encountered this situation. The general idea is that the faucet is broken, and then directly replaced with a new faucet. However, this is not the case in all cases. Next, Stainless Steel Faucets manufactures to introduce the repair method of the dripping of the faucet.

1. Turn off the sluice first, and then remove the small screw. Some screws are hidden under plastic buttons or plastic sheets, etc. These buttons or plastic sheets snap or screw into the handle.
2. After removing the handle, check the parts in the faucet. Use pliers or the wrench can be adjusted to remove the packing nut. Turn the spool or shaft in the same direction as when you opened the faucet to unscrew them.
3. Remove the screw that fixes the washer. If necessary, use penetrating lubricant to loosen the screw. Check the screw and spool, and replace it if there is damage.
4. Replace with a brand new washer. The normal faucet will not drip. You can see if the old washer is flat or flat. Remember to choose to replace it with the same new washer. The gasket designed only for cold water will swell violently when hot water flows through it, blocking the water outlet, making the hot water flow slower. Some gaskets can work in hot and cold water, but you must make sure that the gasket you bought for replacement is exactly the same as the original one.
5. The new gasket has been fixed to the spool and the faucet can be reinstalled. Turn the spool clockwise. After the spool is in place, reinstall the packing nut. Be careful not to allow the wrench to leave scratches on the metal.
6. Reinstall the handle and put the button or disk back in, turn on the water supply again, and check if there is any water leakage.

information about Stainless Steel Faucets : https://www.afastainlesskb.com/product/stainless-steel-faucets/