Today, follow 100w Street Light Housing Manufacturers to see what is the difference between the maintenance of sodium light source street light and LED light source street light:

1. Maintenance of sodium lamp light source street lamps: When we repair sodium lamp light source street lamps, we first consider where a circuit break has occurred. Let's observe the bulb first. The bulb is black, the filament is broken, and the bulb is white. It is possible that the bulb is broken. Then we look at the ballast, the appearance is okay, but the surrounding of the ballast is black, or the ballast may be broken. Looking at the launcher, the appearance is okay, as long as it is black, it is broken. It is also possible that the insurance is burned, mainly because the insurance is a protection circuit, and any point of current overload may burn out the insurance. When we find that our bulbs, ballasts, starters, triggers, and insurance are not broken, we think about the line. Open the inspection door of the street lamp, open the cover of the well, and start to find the line one by one. First, we look for the line of fire and the zero line leading to the street lamp to see if it is oxidized, whether it is rotten, or broken. When we inspect them one by one and repair them one by one, we wrap them with waterproof insulation tape. After power transmission test, there will always be a street light on, and the street light is on, we will complete the repair.

2. Maintenance of LED light source streetlights: When we repair LED streetlights, we first consider where a disconnection has occurred. Let's observe the lamp beads first. If the lamp beads are black or the filament is broken, the lamp beads may be broken. Then we look at the constant current source, the appearance is okay, but the circumference of the constant current source is dark, or the constant current source may be broken. When we find that our lamp beads and constant current source are not bad, we consider the matter of wires again. Open the inspection door of the street lamp, open the cover of the well, and start to find the line one by one. First, we look for the line of fire and the zero line leading to the street lamp to see if it is oxidized, whether it is rotten, or broken. When we inspect them one by one and repair them one by one, we wrap them with waterproof insulation tape. After power transmission test, there will always be a street light on, and the street light is on, we will complete the repair.

The above content is organized and shared by Hot-Selling Street Light Housing Suppliers ,hoping to help those in need.