This website uses cookies to ensure you get the best experience on our website.
To learn more about our privacy policy haga clic aquíWhat should I do if there is a sudden breakdown during normal driving? The following Electric Bike Factory teaches you a very practical and simple way to deal with the problem of the motor not rotating, come and see it, maybe it can help you get rid of the bad luck of halfway down.
1. Check the air switch
For luxury models, open the seat barrel and find the air switch to check whether the air switch has tripped. If it trips, push it up to continue driving. There are two reasons for the switch trip: severe vibration tripping of the air switch, or instantaneous overcurrent trip. No tools are needed.
2. Turn on the keyless driving function of the anti-theft device
Currently, electric vehicles on the market are generally equipped with anti-theft alarms and have the function of keyless driving. If it is a failure of the power signal system of the whole vehicle: such as damage to the electric door lock, poor contact of the controller electric door lock signal wire, etc., this function is very practical and does not require any tools.
3. Check the reset of the brake switch
Electric vehicles have brake and power-off functions, and the signal source of brake power-off is generally to collect the action results of the brake switch. When the brake switch is stuck or malfunctions, it will cause the whole vehicle to be powered off. This can be multiple times Severely brake, whether you can drive on demand. No tools are needed.
4. Press and hold the self-repair switch
Electric vehicles with more advanced technology may currently be equipped with automatic repair switches, that is, when the entire vehicle circuit fails, refer to the operating instructions and press the repair button to continue driving. At present, some brands of electric vehicles (such as Taiwan bells) on the market are equipped with this function. No tools are needed.
5. Short circuit the controller power signal line
Electric vehicle controllers have the function of preventing "runaway", that is, the on-off of the controller's output is adjusted through the electric door lock. For quick processing, you can directly short the two wires of the controller: the power wire (thick red wire) and the power signal wire (thin red wire). At this time, if the power information line fails, the motor will still operate normally, but it is not controlled by the electric door lock. A wrench or socket may be required.
The above content is organized and shared by Fast Sport Electric Motorbike Manufacturer, hoping to help those in need.