This website uses cookies to ensure you get the best experience on our website.
To learn more about our privacy policy haga clic aquíThere are five main types of brake systems for electric bicycles: holding brakes, drum brakes, expansion brakes, disc brakes, and iron brakes. Among them, "disc brakes" can be divided into hydraulic disc brakes and cable disc brakes. It can be divided into: with heat sink and without heat sink. Sport High Power E-Bike Manufacturers introduces the comparison of five brake types:
1. Holding brake: According to the situation on the market, there are still some low-end electric vehicle markets using holding brakes. The disadvantage of this kind of brake is: there are screws on the top and rear, and the braking principle is from outside to inside. The sound is very harsh when braking, and the braking effect is average.
2. Expansion brake: similar in appearance to the holding brake, but there are no screws on the top and rear; the braking principle is braking from the inside to the outside, and the braking effect is medium.
3. Disc brakes: Disc brakes are mostly used for front brakes. They have brake discs and calipers. There is no oil pump on the brake levers, and ordinary brake cables are used; the calipers fixed on the suspension are mainly used to make the brake disc brakes by pulling the cables; The braking effect belongs to the higher category.
4. Iron brake: The appearance is wider than that of the expansion brake. The braking principle is to brake from the outside to the inside. The braking effect is moderately low, and the noise is very small when braking. However, the iron brake needs to add oil and lubricating oil to ensure the brakes. Effect.
5. Drum brakes: Among the five systems, drum brakes are relatively moderate in cost, easier to debug, and safe in the middle of the five types of brakes. They are also a type of brake commonly used in general electric vehicles.
Buying advice: The brake selection of electric vehicles is generally relatively fixed, and different brakes are sufficient to meet the needs of riding. Based on the principle of selecting the best, and secondly based on the comparison of the braking effect, generally speaking, the braking effect of disc brakes and drum brakes It is best to choose the brake type as the priority for consumers. At the same time, consumers should try their best to choose products from large companies, which have higher safety performance.
Through the above introduction, Electric Vehicle Manufacturers hopes that you can simply refer to the content of this article in future use.