Forum » General » News and Announcements » How To Play With Replay Mode And WDS On A Belkin Router?

How To Play With Replay Mode And WDS On A Belkin Router?

  • Here are the steps:

    1. You need to begin with plugging one end of the Ethernet cable into one of the “LAN” ports, which you can find on the back side of your Belkin wireless router.
    2. Connect the other end of the Ethernet cable to your PC or Mac computer.
    3. Open a web browser and go to http://192.168.2.1.
    4. Click on the “Login” link in the upper right corner of the window, then press “Submit”.
    5. Make a note of the “WLAN MAC” address that appears on the router’s status page.
    6. Click the “wireless Bridge” button, which you can find on the left side link on the page.
    7. Check the boxes corresponding to “Enable Wireless Bridging” and “Enable ONLY specific Access Points to connect”. If you miss to check any of the boxes, then you won’t be able to activate WDS on your Belkin router.
    8. Enter the WLAN MAC address from Step 5 in the “AP1” field.
    9. Hit “Apply changes” to save the router’s configuration and activate WDS mode.

    If you have questions or need any assistance troubleshooting, just visit: Linksyssmartwifi | Google Wifi Update
      May 17, 2021 12:10 AM MDT
    0