For HP Deskjet 2600 Printer Setup, first, remove the plastic cover stick around the printer's surface. Now, open the front door and remove the cardboard inside. After this, remove the tape on the front and back of the HP printer. You have to open the front cover and then open the ink cartridge access door to remove the cardboard. Close the ink cartridge access and the front door. You’ll find a fox that contains the tri-color cartridge, black color cartridge, power cord, and a USB cable. You need to untie the power cord, connect one end of the cord to the back of the printer and the other end to the wall outlet. Lastly, power on the button, and you are done with the printer setup. In case you face any problems while following the steps mentioned above for the printer setup, you can refer to the HP 2600 DeskJet Manual to get an instant solution to your problem.