This website uses cookies to ensure you get the best experience on our website.
To learn more about our privacy policy Click here50w Street Light Housing Wholesaler introduced the construction quality and azimuth size of the light pole foundation, which are related to the center size of the light position, the height of the lamp, and the firmness of the pole. The key to these factors is that the foundation construction must be strictly checked, constructed according to the drawings, and meet the requirements of the standard. Some products have a straight line on the straight section that has just been installed, which is neat and beautiful, but after several winds and rains, it has become swaying and swaying, seriously affecting the appearance of the city. The reason is that the foundation design is unreasonable and the construction does not meet the standards.
With the development of urban construction, the urban light pole lighting project is an important window of the city. How to save operating and management costs, maximize the social and economic benefits of products, choose economical and reasonable power supply and distribution methods, and flexible and accurate control and management mode is a key and difficult point in the current lighting system design. Excellent lighting design should be that the brightness, uniformity, and glare limit of the street light meet the specifications, have good inducibility, and have low investment, low power consumption, safe and reliable operation, easy maintenance and management, try to use advanced technology, and continuously improve the technology of road lighting. Level and technological content.
The controller is the key component that acts as a manager in the entire light pole system. Its biggest function is to comprehensively manage the battery. A good controller should set various key parameter points according to the characteristics of the battery, such as the overcharge of the battery. When selecting the controller, pay special attention to the parameters of the controller to restore the connection point. Because the battery has voltage self-recovery characteristics, when the battery is in the over-discharge state, the controller cuts off the load, and then the battery When the voltage is restored, if the parameter points of the controller are not set properly at some time, the lamps may flicker and shorten the life of the battery and the light source.
Through the above introduction, Energy Saving Street Light Housing Company hopes that you can simply refer to the content of this article in future use.