For the procurement of the LED industry, it will often face the purchase of a variety of LED accessories, so 50w Street Light Housing Supplier share what skills will be available for the selection of LED lampshade beads?

The brightness of LED is different, the price is different. LEDs used in LED lamps should meet the laser class Ⅰ standards.
Anti-static ability The LED with strong anti-static ability has a long life and is therefore expensive. Generally, LEDs with antistatic greater than 700V can be used for LED lighting.
LEDs with the same wavelength have the same color. If the color is the same, the price is high. It is difficult for manufacturers without LED spectrophotometers to produce products with pure colors.
Leakage current LED is a unidirectional conductive luminous body. If there is a reverse current, it is called leakage. LED with large leakage current has short life and low price.
LEDs with different lighting angles have different lighting angles. Special light angle, the price is higher. Such as full diffusion angle, the price is higher.
The key to different quality of life is life, and life is determined by light attenuation. Low light decay, long life, long life and high price.
The luminous body of the wafer LED is a wafer. Different wafers have very different prices.
Wafer size The size of the wafer is expressed by the side length. The quality of the large wafer LED is better than that of the small wafer. The price is proportional to the chip size.
The colloid of ordinary LED is generally epoxy resin. The price of LED with anti-ultraviolet and fire retardant is more expensive. High-quality outdoor LED lighting should be anti-ultraviolet and fire resistant.

Through the above introduction,Energy Saving Street Light Housing Manufacturers hopes that you can simply refer to the content of this article in future use.