After the work of
Raymond Mill no-load operation stage preparation stage is completed, if there is no abnormality in Raymond mill equipment, the no-load commissioning of the next stage can be started.
Raymond Mill no-load test run is to start Raymond mill without putting steel balls and adding ore materials in Raymond mill cylinder, and Raymond mill will run at idle continuously.
Generally, Raymond mill needs to operate for 8-16 hours, at least 4 hours.
Under normal circumstances, the longer the test run, the better the running in of Raymond Mill's main bearing and gear tooth surface.
The length of no-load operation of ball mill shall be determined according to the actual operation of Raymond mill.
Zenith Indonesia 1000t / D gold mine all sliming cyanidation project starts Raymond Mill no-load operation after the preparation before commissioning.
During the idle operation of Raymond mill, Zenith's commissioning personnel inspected the lubrication, gear transmission, lining plate, main bearing temperature and the overall condition of the idle operation of various components of Raymond mill.