The newly-furnished Stainless Steel Laundry Sink in the home, for more than a month, why there is a phenomenon of bottom discoloration, then Xiaobian will analyze why this kind of situation will occur.

The new sink is used for one month. Stretching the sink, the reason for the corrosion of the sink:

Because the stretching basin is thinner, corrosion is more common. In particular, some 201 stainless steel or stainless steel is very prone to corrosion.
Corrosion is a special case, basically a circle. It is estimated that there is also a relatively hot round vessel in the sink. The basin sink that stretches the sink is very thin, and this corrosion halo appears after continuous heating. It is like the oxidized halo of a hand-sink welding path.

The way to deal with this type of situation is: you can use a scouring pad to clean it up. Basically, it can be ruled out that it is an electrolytic process, that is, some so-called nano or other named coating tanks on the market. Because the problem of electroplating the sink is that it takes a long time, or if there is a scratch, the coating will fall off, which is a peeling effect. You are a new sink. Even if the electrolysis technology is not good, the coating will only cause partial peeling. It will form a color difference with the surrounding of the sink or the panel. There is no obvious peeling effect on the photo.

information about Stainless Steel Laundry Sink : https://www.afastainlesskb.com/product/