Kitchen is our daily cooking place, the sink is one of the essential kitchen equipment, its importance can be imagined. Many people will give priority to brand water tanks when choosing water tanks. However, it is possible that the water tank will reverse during subsequent use. Xiao Bian will come today to teach you how to deal with the problem of Stainless Steel Kitchen Sink backflow correctly.

First, the water outlet of the water tank leaks water
Generally, the axial gasket in the water tank is damaged, so it is sufficient to replace it. Use pliers to rotate the gland bolt, loosen it and remove it. Remove the ground axial gasket with a clamp and replace it with a new one.

II. Water Leakage at Joint of Sink Nozzle
The biggest possibility is that the cap nut of the faucet is loose, which can be solved by tightening the cap nut again or replacing it with a new sealing pad.

Three, sink bolt under the gap leakage
It may be that the triangular gasket in the gland is worn. At this time, use a tool to rotate the screw of the faucet, loosen it, remove the screw and bolt head, remove the gland, then remove the triangular gasket in the gland and replace it with a new triangular gasket.

Four, water pipe aging, sealing is not in place leakage
The water pipe is aging and the seal is not in place. Just replace the hardware. When installing hardware, all kinds of impurities in the pipeline must be thoroughly removed to avoid sticking and blocking of the valve core.

Five, the sink blockage solution
1. First of all, close the water pipe to avoid causing more accumulated water. Don't try to flush impurities down.

2. Check the cause of the blockage. Generally, the blockage of the kitchen sewer pipe is at a U - shaped bend. If it is a sewer pipe with blowdown screws, pad a basin under it before treatment, unscrew the blowdown screws, and connect the two sides with steel wires to solve the problem. If not, remove all downcomers, unscrew all plastic connectors, rinse clean, remove impurities and then assemble them in turn.