Showers are essential household items in the bathroom. Many people may only pay attention to the amount of water discharged from the shower when they choose the shower. Whether the nozzle is clean or not, the coating process is not well treated, but the installation height of the shower is neglected. In fact, the installation height of the bathroom shower is very important, which will directly affect the comfort of use. So, how high is the height of the shower installation? Let's take a look at the Stainless Steel Sink Manufacturers .

First, the ceiling mounted shower installation height
The concealed shower is the way to expose only one shower head. The shower column that is out of the water is buried in the wall and cannot be seen. The center of the water outlet from the wall for receiving the shower head should be about 2.1m away from the ground. The distance between the shower control switch and the faucet from the ground is preferably controlled at about 1.1m. This is also the most common shower installation height.

Second, the surface mounted lifting rod shower installation height
Our common products for this type of shower are all installed outside the wall. The wall-mounted price-up lever showers generally use the water surface as the reference plane to judge the height. The distance from the shower head to a height of 2 m is optimal. In the actual installation, the specific judgment should be made according to the user's actual height standard. The height of the shower head is generally just when the user raises his or her arm and the fingertips just touch it. However, the installation should not be too low to prevent the fingers from being hurt when the arm is waving during the shower.

Note that the switch in the wall-mounted shower is the hot water on the left side and the cold water on the right side. Don't make a mistake. The center distance between the left and right outlets is 150mm. During the construction, pay attention to the water outlet of the wall must be flush with the surface of the tile. The water pipes inside can't be smashed and must face the wall.

Third, the installation height of the shower
1. The height of the shower mixing valve from the ground: the distance between the shower mixing valve and the ground, generally we control within the height range of 90~100cm. In this interval, we can also fine-tune according to our height. However, generally do not raise 110cm higher. If it is too high, the shower lift can not be installed.

2. the reserved height of the shower faucet: the reserved position when laying the pipeline is first considered clearly, generally 15mm higher than the blank wall, so that the silk head can be buried when the tile is finished, to ensure the beautiful appearance of the wall.

3. Spacing of the inner elbow of the shower: The standard for the spacing of the inner elbow of the shower is generally about 10~15cm.