The scope of application of X-ray Orientation Analyzer is very wide. So when you use this equipment, do you know the criteria for safe use of equipment? Next, let us follow us to understand the radiation safety requirements of the X-ray directional analyzer.
1. At least one full-time staff member shall be employed for radiation safety.

1. Each inspection equipment must be equipped with more than 2 operators. The operators should participate in radiation safety and protection training, and pass the inspection and certification. 3. It is necessary to obtain a radiation safety license issued by the provincial environmental protection administrative department.
2. Equipment protection Every month, accessories, electromechanical equipment and monitoring instruments for flaw detection equipment, especially safety joints

6 Lock the device for inspection, protection, and timely replacement of parts.

1. Self-dose handling At least two operators are present when testing, and each operator should be equipped with a self-dosing meter. The self-dosing meter should be numbered and worn by the person, and sent to the inspected department with time to measure and set up their own dose file.
2. File records The inspection operation, radiation environment monitoring records, self-dose handling and repair record guidelines should be established and archived for inspection.
3. Emergency plan for radiation incidents Prepare emergency plans for flaw detection radiation incidents. The plan should include the prevention methods for incidents, the handling methods after incidents, and the procedures for the presentation of incidents. After the attack or discovery of the radiation incident, the incident unit shall immediately report to the environmental protection administrative department and the health administrative department of the place of use according to the requirements of the regulations.