What issues should I pay attention to when purchasing an X-ray Orientation Analyzer? I will consider purchasing an X-ray orientation analyzer, which shows that I have a general understanding of the role of the X-ray orientation analyzer. However, before purchasing, I still need some understanding of the X-ray orientation analyzer. I can pay attention to these:
What issues should I pay attention to when purchasing an X-ray orientation analyzer?
I will consider purchasing an X-ray orientation analyzer, which shows that I have a general understanding of the role of the X-ray orientation analyzer. However, before purchasing, I still need some understanding of the X-ray orientation analyzer. I can pay attention to these:

[1] image quality;
Image quality detection should be the core of this device. It is like buying a camera. The quality of 24MP is better than that of 16MP. X-ray is also the same. The factors affecting image quality include power, voltage, spot size, detector resolution, X. The proximity of the source to the object and the field of view, such as a 130KV source, are more penetrating than the 90KV source, and image quality can be subjective. The good news is that you may find that systems for PCB components can provide very good to excellent image quality. This may be more related to the way the check is set up than the technical capabilities of its components.

[2] Imaging method
At present, the market has 2D, 2.5D, 3D, CT and other major categories;

[3] Detection system

For the real-time identification of the detected defect location, area size and other information, it has important guiding significance for the work of the later technicians.

[4] After-sales maintenance

Different types of X-ray tubes. The "open tube" type of replacement is relatively fast and inexpensive - it may take only a few pounds, a few hours - but it needs to be done after every 200-300 hours of use. The "closed tube" type can last for many years, but the price is much more expensive, perhaps thousands of pounds. So maybe the best choice depends on how many systems you will use. X-ray orientation analyzer detectors mainly include Rayence in Korea and Iray in Germany. X-ray sources will cause these to decrease over time, typically by about 20% after 10 years. Although it is still usable, it is recommended to replace it after 8 to 12 years. It is also worth finding out the common failure modes on the system, because although the component parts are similar, they can be assembled in different ways.