Today, follow the kitchen faucets manufacturers to identify the quality of the stainless steel sink:

1, the thickness of the stainless steel sink
Good stainless steel sinks use thicker plates, good quality sinks with imported 304 stainless steel plates and a thickness of 1 mm, while ordinary low-grade sinks use 0.5 mm to 0.7 mm. Since the sink has been edge treated, it is difficult to see the thickness at once. The easiest way is to press the surface of the sink a little bit. If it is pressed down, it means the material is very thin. Of course, if you can borrow the vernier caliper and the spiral micrometer, don't It’s so troublesome.

2, the sink surface
Careful observation of the stainless steel sink, we can find that the surface of the good quality sink is flat, the visual gloss is soft, not easy to stick to oil, easy to clean and wear-resistant. The inner corner of the good quality sink is close to 90 degrees, the inside of the sink is larger, and the volume of the basin is also large.

3, stainless steel sink components
At the same time, you can observe the matching parts of the sink: the quality of the falling head requires wall thickness, smooth processing, no water leakage when the cage is closed, and the beads are durable and comfortable to handle. The downpipe is required to be made of environmentally friendly disposable materials, and has the functions of easy installation, deodorization, heat resistance and aging resistance, and is durable.

The water removal device may be something that most people ignore, but it is a very important part of the sink configuration. The price of the sink is also very large. The price of a good stainless steel water purifier is over 100 yuan. The water separator contains an automatic water discharge device, but the function is not necessarily a good thing, it is convenient to start, and it may cause problems after a long time!

4, stainless steel sink production process
There are welding methods and integral molding methods. We have seen some brand-name sinks, the same size, the price is very different. There are material factors as well as process costs. Of course, it can be said with certainty that the stainless steel sink material of the one-piece molding method is definitely better than the welding method. The one-piece molding technology solves the leakage problem caused by the corrosion of the weld seam due to the welding of a variety of chemical liquids (such as detergents, stainless steel cleaners, etc.). The one-piece molding process is a particularly important process and requires a high degree of material for the steel sheet. What kind of process is used is an obvious manifestation of the quality of the sink.

At the same time, you can turn the sink over to look at the bottom of the sink. The bottom of the good quality sink is sprayed or glued to the rubber sheet and does not fall off. It can reduce the sound of the faucet from the impact of the pelvic floor and play a buffering role.

5, the weight of the stainless steel sink
Stainless steel is a kind of iron alloy. The specific gravity of steel is 7.87. Nickel and chrome heavy metals are added inside. The specific gravity of these metals is larger than that of steel, so the weight is relatively heavy (of course, refer to the thickness of the sheet). If it is a fake, inferior stainless steel, the weight of the steel plate is as light as chrome.

information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/