1, keep the environment dry and not wet

Why should we keep the environment dry? Electronic products are afraid of getting wet. Everyone knows that electronic products are prone to short-circuit after being wet. Many customers have not done this step. X-ray Orientation Analyzer are made of electronic products, circuit boards, etc. Among them, the main components are organic electricity, electronics, optics, etc. If the moisture is affected by the influence of the humid environment, the light component changes the circuit parameters or the mechanical components do not work well. In the worst case, the electrical components are short-circuited after the moisture is wet and the machine components are burned out. Or, the electric shock will be formed due to the decrease of the insulation strength. Therefore, the environmental requirements of the X-ray orientation analyzer are very important. It is necessary to take measures to prevent moisture. Keep the environment dry and do not let the X-ray orientation analyzer be mildewed. It can ensure the normal operation of the machine and prolong the service life of the machine. Moisture proof is one of the safety measures and must be highly valued.

  2. External cleaning of X-ray orientation analyzer

Because the X-ray orientation analyzer is used to detect passenger luggage, the machine is placed in a public place. It will inevitably have dust for a long time. When scrubbing the X-ray orientation analyzer, you should also pay attention to it if you use a wet towel to scrub. Equipment should be used without water or water. Wipe the machine without using a damp cloth. Use a dry towel to wipe off the dust. If the X-ray orientation analyzer is too dirty, the towel should not be too wet when scrubbing. Wring the towel in the towel. Wipe, otherwise the water of the towel will flow into the X-ray orientation analyzer to make the machine damp, affecting the normal operation and service life of the machine.