Group Info

• Know Heating Problem of Flat Rubber Vulcanizing Machine Motor Business & Finance
• The motor of rubber vulcanizing machine plays a very important effect in the automatic flat vulcanizing machine, but the motor often heats up during long-term use. There are many reasons for the heating of the automatic flat vulcanizing machine motor....  moreThe motor of rubber vulcanizing machine plays a very important effect in the automatic flat vulcanizing machine, but the motor often heats up during long-term use. There are many reasons for the heating of the automatic flat vulcanizing machine motor. Today, we will talk about the failure analysis of the automatic flat vulcanizing machine motor heating. I hope I can bring you some help.
  
  1. Overload: Use a clamp meter to detect the normal current of the four-column hydraulic machine motor. If the current load of the motor is accidentally large or small, the hydraulic pressure may be increased; if it is just turned on The current is relatively large, and the current is too high when the current of the hydraulic system does not start to run, which indicates that the motor is faulty.
  
  2. The bearing is stuck. Check whether the bearing of the motor of the hydraulic system of the vulcanizing press is stuck and the rotor is swept. The operator can also judge this fault by sound.
  
  3. The voltage fluctuates...    less
• • na bai (owner)
• • 185 total views
  • 1 total member
  • Last updated June 25, 2021