Group Info

• Maintenance of Rubber Extruder Is Introduced Business & Finance
• ①The rubber extruder head should be assembled together and installed on the extruder as a whole.
  
  ②Before assembling the machine head, wipe off the grease applied during storage, carefully check the cavity surface for bruises, scratches, and rust...  more①The rubber extruder head should be assembled together and installed on the extruder as a whole.
  
  ②Before assembling the machine head, wipe off the grease applied during storage, carefully check the cavity surface for bruises, scratches, and rust spots, perform necessary polishing, and then apply a layer of silicone oil on the surface of the runner.
  
  ③Assemble the plates of the machine head in order, apply high temperature grease to the threads of the bolts, and then screw on the bolts and flanges.
  
  ④ Put the perforated plate between the flanges of the machine head to ensure that the perforated plate is pressed tightly without overflow.
  
  
  ⑤The horizontal position of the die should be adjusted before the fastening bolts of the connecting flange between the die head and the extruder are not tightened. The square die head can be adjusted horizontally, and the round die head should be based on the bottom surface of the finalized model. The bottom of the mold is leveled.
  
  ⑥Tighten the...    less
• • na bai (owner)
• • 179 total views
  • 1 total member
  • Last updated August 13, 2021