Silicone Waterproofing Agent: Construction Application Range
1. Spray or brush
In the occasions where the surface of concrete, cement mortar, concrete prefabricated structures is relatively rough, spraying is better, and in the case of smooth surfaces such as stones, marble, granite, etc., brush coating is... more1. Spray or brush
In the occasions where the surface of concrete, cement mortar, concrete prefabricated structures is relatively rough, spraying is better, and in the case of smooth surfaces such as stones, marble, granite, etc., brush coating is available.
Before use, the base surface should be carefully cleaned, and the dust and moss spots should be cleaned up. Cracks, holes, etc. should be sealed and repaired in advance, and the infill should be dense.
When using, apply the silicone waterproofing agent to the dry base surface (wall, etc.) with a clean agricultural sprayer or brush for three times in a row, without intermittent in the middle, spray the wall for 5m per kilogram. 24 hours after construction, it shall not be invaded by rainwater. The construction shall be stopped when the temperature is below 4℃. The base surface must be dry during construction. It has a water-repellent effect at room temperature for 24 hours, and the effect is better after a week, and the curing time in winter is... less