Automatic
[u]Pet Blowing Machine[/u] steps
1. Press the pet blower control panel start button and the machine starts normally.
2, the mold is in the mold clamping state, test whether the blowing is normal
3, waiting for heating for 2-3 minutes, the pet blowing machine stability is adjusted to a suitable stability, each lamp temperature is not the same, it needs to be adjusted to the appropriate temperature in conjunction with the pet blowing machine manufacturer's guidance. The next time you turn it on again, you don't need to adjust the temperature. Just wait for the pet blower to heat for 2-3 minutes and observe if the temperature is right.
4. In case of emergency, you need to press the emergency button to terminate the machine work.
Daily considerations:
1. Every once in a while, the machine can be maintained. The maintenance specifications can refer to our pet blower's “Pet Blowing Machine Daily Maintenance and Specifications” for maintenance or direct online consultation with after-sales technical support engineers for online counseling.
2. Regularly clean the mold and ensure the cleanliness of the mold.
3. After shutting down, clear the gas and water stored in the machine itself.
Summary: The above is the precautions and use steps of the automatic pet blowing machine. When you use the automatic pet blowing machine, you only need to pay attention to it. Regularly, the pet blowing machine can be maintained regularly, which can increase the service life of the automatic pet blowing machine. , better production. As a professional
[u]China Plastic Handle Manufacturers[/u], Jilian Mould has professional technology in both products and equipment. We believe that we can bring you satisfactory products and services. If you are interested, please hurry. Come and contact us.
Automatic [u]Pet Blowing Machine[/u] steps
