Belkin N300 Setup - Belkin Range Extender Setup - Belkin Setup
The Belkin range extender enhances the wireless network’s strength that provides high-speed internet connection in the areas where there are low connections. The Belkin range extender is an ideal solution to eradicate network-related issues. Hence, the users facing poor internet connection or dead zone issues within their home or office must consider using the Belkin N300 range extender.
The Belkin N300 range extender is a perfect networking device with a simple and easy setup procedure. However, the users who cannot perform the Belkin N300 Setup procedure are suggested to go through the steps given below. Once the users perform the setup steps, they can avail the benefits of the Belkin range extender. Therefore, this write-up includes the step-by-step procedure for Belkin N300 Setup. It also has the steps to download and update the firmware of the Belkin Range Extender.
How to execute the Belkin N300 Setup Procedure?
This section includes the step-by-step procedure for Belkin N300 Setup.
First, plug the Belkin range extender into the electrical outlet.
After that, connect the device to the range extender’s default SSID.
Next, open the internet browser on their device or system.
After this, search for the “http://belkin.range” in the web page's search section.
Note: the users can access the Belkin N300 setup page via “192.168.206.1.”
The users will be redirected to the official page of Belkin Setup.
On the official page, the users should tap on “Start Setup.”
Note: The users can click on “Manual Setup,” located at the bottom of the page.
After that, the users need to select the network name.
Note: Users extending a dual-band router are recommended to select both network names.
Note: The users must tap on the “Refresh” button if the wireless network is not available.
Next, the users are suggested to write the passwords in the given sections and then tap on the “Next” button.
The users must enter the admin password on the “Secure your range extender” page to access the range extender’s settings.
After doing the above changes, the users are suggested to click on the “Save” button to save all changes.
After that, the Belkin N300 range extender will re-start.
Note: The users need to wait for the LED to turn ‘Blue.’
After this, the users must connect the wireless device with the range extender’s network name.
After that, the users should tap on the “Next” button once it turns green.
Note: The next button won’t turn green if the users aren’t connected to the range extender’s wireless network.
After following the above steps, the users can smoothly execute the Belkin N300 Setup process on their device. If the users face issues during the setup process, they must get in touch with the customer support team of Belkin to get a solution.
How to Update the Firmware of the Belkin N300 Range Extender?
This section includes the complete procedure to update the firmware of the Belkin N300 Range Extender. Hence, the users are suggested to go through the following points.
Note: The users first need to download the firmware before beginning with the update procedure.
Steps to download the firmware of the Belkin Range Extender:
Firstly, the users are suggested to open the web browser on their device.
After that, visit the “Belkin Support” website.
The users will be taken to the official Belkin page.
Next, the users are advised to enter the range extender's model number in the given field.
Note: If the users don’t know the model number of their device, they should tap on “How do I find my model number?”
After that, the users should select their device.
Next, the users are recommended to tap on “Downloads/firmware” to open the download list on the product support page.
Note: The users can also scroll down under the Downloads/Firmware section and click on “Download Software.”
After that, the users are suggested to choose their hardware version and then tap on the “Download” link of the Belkin range extender’s firmware.
Now, the users are required to click on the “Save File” button and then on the “OK” button.
After following the above steps, the firmware will get downloaded successfully on the user’s device.
Therefore, to download the Belkin range extender's firmware, the users are suggested to go through the above guidelines. Once the firmware’s download procedure is finished, the users can begin with the update method. If the users encounter any issue while executing the above steps, they must contact Belkin’s technical support expert team to solve their problem in no time.
Steps to Update the Firmware of Belkin Range Extender:
Note: The users must ensure that their computer is connected to the Belkin range extender via an ethernet cable for stable connectivity.
Note: The users should not update the range extender's firmware wirelessly as interruptions may cause permanent damage to the extender.
Once the users have successfully downloaded the firmware, they are advised to open the web browser on their device.
After that, the users are required to search “http://belkin.range/” in the address section and then tap on the “Search” button.
Note: The users can also use “192.168.206.1” to access the web-based setup page of the Belkin range extender.
On the official page, the users are suggested to tap on the “Login” button.
After that, users are recommended to provide the “Password” of the range extender in the given field and then tap on the “Submit” button.
Note: If the users haven’t set up the password, they are advised to leave the password field blank and then tap on the “Submit” button.
After this, the users are advised to click on “Firmware Update.”
Next, the users are suggested to browse or tap on the “Choose File” button and choose the firmware they have downloaded.
After selecting the downloaded firmware, the users should tap on “Open.”
After opening it, the users must tap on the “Update” button to proceed further.
Next, the users should click on “OK” when the prompt appears.
Another prompt will appear on the user’s screen stating that the device will not respond while updating the firmware. The users should tap on “OK” and wait till the firmware update finishes.
Note: The users should make sure that they do not power off, unplug, or re-start the Belkin range extender while updating the firmware.
After performing the above steps, the users can successfully update the firmware of the Belkin range extender. Therefore, the users are suggested to go through the above instructions. If the users face any issue during the update process, they must contact the customer support team to solve their problem.
This write-up includes the step-by-step procedure for Belkin N300 Setup. It also has the steps to download and update the firmware of the Belkin Range Extender.