Page Information

• Posted By: xiu umin
• Posted On: Jun 12, 2019
• Views: 2
• Likes: 1
• Category: Electronics
• Description: Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/ not only do a good job, but also maintenance, do not know how to maintain will greatly reduce the actual life of the air cooler mould. 1. Maintenance of air cooler mould loading process (1) Before loading the air cooler mould, the upper and lower surfaces of the mould should be cleaned to ensure that the mould mounting surface and the surface of the press are not crushed, and the parallelism of the upper and lower mounting surfaces of the mould during the production process. (2) After installing the air cooler mould, open the mould and clean all parts of the mould, especially the guiding mechanism. For surface part moulds, clean the surface to ensure the quality of the part. Lubricate the sliding parts of the mould and apply grease. Inspect the various components of the air cooler mould, especially safety components such as safety side pins, safety screws, side guards, stamped obsolete roads, etc. 2. Production maintenance (1) In the production process, the corresponding part of the air cooler mould is regularly oiled, such as: thimble, inclined top, shovel bottom, slider, guide post guide sleeve and so on. (2) Regularly clean the parting surface of the product. 3. Post-production maintenance (1) After the end of production, a thorough inspection of the air cooler mould is required. (2) Thoroughly clean the mould to ensure the mould is clean. (3) Clean the waste in the mould and ensure that there is no waste in the waste bin. (4) The use condition of the air cooler mould and the situation after use are faithfully fed back to the mould product. Click Furniture Mould https://www.furnituremould.com/ to learn about more information.