Page Information

• Posted By: xiu umin
• Posted On: Jun 12, 2019
• Views: 1
• Likes: 1
• Category: Travel
• Description: 1. During use of the Table Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/ , the punch is prone to cracking, bending and smashing, and the punching sleeve is usually broken. Damage to the punch and sleeve is usually replaced with parts of the same specification. The parameters of the punch mainly include the workpiece size, the mounting size and the length dimension. 2. Springs and other elastic parts are easily damaged during use, and breakage and deformation usually occur. The method used is replacement. During the replacement process, we must pay attention to the specifications and model of the spring. The size and model of the spring are determined by the color, outer diameter and length. It can only be replaced when all three items are the same. The spring preferably has the mass of the inlet. 3. The material problems of the main working parts of the table mould are not properly selected. The material performance is poor, not wear-resistant; the mould steel is not refined, and there are a large number of smelting defects, convex and concave moulds, forging blank forging process is not perfect, heat treatment has hidden dangers. 4. Press the pressure plate, glue the components, etc., and remove the parts such as the peeling plate and the pneumatic top plate. During maintenance, check the accessories of each component for damage, repair damaged parts, check the pneumatic top material for air leakage, and take measures for specific situations. If the air tube is damaged, replace it. Key tracking and inspection must be performed on several important parts of the table mould. 5. Fix the parts and check if the fasteners are loose or damaged. The method is to find parts of the same specification for replacement. In addition, the table mould must be sharpened after long-term use. After grinding, the surface of the cutting edge must be demagnetized and must not be magnetic, otherwise it will easily block the material. Click Chair Mould https://www.furnituremould.com/product/chair-table-stool-mould/ to learn about more information.