Page Information

• Posted By: xiu umin
• Posted On: May 07, 2019
• Views: 1
• Likes: 1
• Category: Places
• Description: Things to be aware of before the Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/ test 1. Understand the relevant information about furniture moulds: It is best to get the furniture mould design surface, analyze in detail, and understand the technicians involved in the furniture mould to participate in the test. 2. First, check the mechanical coordination on the workbench: It should be noted that there are scratches, missing parts, looseness, etc., whether the mould sliding is normal, whether there is a leakage in the water pipe and air pipe joints, and whether there is an opening to limit the mould, it should also be marked on the furniture mould. If the above operation can be done before the mould is hung, problems found during the suspension of the mould can be avoided, and the time is wasted when the furniture mould is removed. 3. After determining the correct operation of each part of the furniture mould, select the appropriate injection moulding machine, and pay attention to the choice of injection capacity, guide width, maximum start, and so on. After confirming that everything is fine, the next step is to hang the mould. When hanging the mould, be careful not to remove all the clamping dies and moulds before opening to avoid the mould falling due to loose or broken clamping stencils. After installing the furniture mould, carefully check the mechanical action of all parts of the mould. Also, note that the discharge nozzle and the feed nozzle are aligned. The next step is to pay attention to the closing of the furniture mould. At this time, the mould closing pressure should be reduced. When clamping at manual and low speed, please pay attention to whether there are unsmooth movements and abnormal sounds. Click Air Cooler Mould https://www.furnituremould.com/ to learn about more information.