How to Improve The Success Rate of Furniture Mould Test (2)
MyWorldGo
Page Information
-
Posted By:
xiu umin
-
Posted On:
May 07, 2019
-
Views:
1
-
Likes:
1
-
Category:
Places
-
Description:
1. Improve Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
temperature:
According to the nature of the raw materials used in the finished product and the size of the mould, a suitable furniture mould temperature control machine is selected to raise the temperature of the furniture mould to the temperature required for production. Once the temperature of the furniture mould increases, the motion of each part should be checked again. Since steel may get stuck due to thermal expansion, care should be taken to slip each component to avoid tension and vibration.
2. If the factory does not have an experimental plan rule, we recommend that only one condition can be adjusted at a time to distinguish the impact of a single condition change on the finished product.
3. According to different raw materials, use the original free to do moderate baking.
4. Furniture mould testing and future mass production should use the same raw materials as possible.
5. Do not completely test the furniture mould. If you have color requirements, you can schedule a test.
6. Problems such as internal stress often affect secondary processing. After the mould is stabilized after the furniture mould test, the mould closing pressure should be adjusted after the mould is slowly closed.
After checking all the above steps, lower the closing speed and closing pressure, set the safety lock lever and jacking stroke, and then adjust the normal closing speed and closing speed.
Click Air Cooler Mould https://www.furnituremould.com/
to learn about more information.