منتدى المواضيع

• 

  Stainless Steel Handmade Sink Manufacturers

  Slow sinking of water in the sink is a very headache and it is...أكثر منSlow sinking of water in the sink is a very headache and it is inconvenient when washing dishes. There are many reasons, which have a lot to do with the sink accessories.Nowadays, the so-called promotional models of many big-name sinks are simplified configuration, and the drain pipes are very simple. It is still a traditional, old-fashioned 32-diameter hose. This kind of pipe is too thin. In addition, our dietary oil is relatively heavy, and the drain pipe of the sink will soon be clogged with oil, causing the sewage to slow down.AFA Stainless Steel Handmade Sink Manufacturers reminded to solve this problem that when choosing a sink, a new type of sewage pipe with a diameter of 50 should be equipped. Can effectively increase the launching efficiency. At the same time, to develop good washing habits, do not directly introduce greasy oil content into the sink.
  information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/  أقل

  Last post بواسطة عضو محذوف - ٣٠ ديسمبر، ٢٠٢١

  ٧٢٦ views ٠ مثل
  12
• 

  Stainless Steel Handmade Sink Manufacturers

  The blocked water tank can be dredged with chemical pipe...أكثر منThe blocked water tank can be dredged with chemical pipe dredging agent. So what precautions should be taken during the dredging process? The following is introduced by AFA Stainless Steel Handmade Sink Manufacturers :There are two types of chemical pipe dredging agents: strong bases and strong acids, and drainage pipes are also available in galvanized cast iron and PVC. Most houses built in the 1990s and before were galvanized cast iron pipes, while modern houses used PVC pipes. It should be noted that strong acid pipeline dredging agent is very corrosive to galvanized cast iron pipes, which may cause adverse consequences. Do not pour strong acid pipeline dredging agent into cast iron pipes. If you must use it, please refer to professional guidance Use or follow the manufacturer's instructions. PVC pipes have good corrosion resistance, but this problem does not exist. Pipe dredging agent can well solve the problem of kitchen sink blocking, which is almost a cure. These products are usually available in...  أقل

  Last post بواسطة عضو محذوف - ٣٠ ديسمبر، ٢٠٢١

  ١٬٠٩٧ views ٠ مثل
  12
• 

  Stainless Steel Handmade Sink Makers Share The Benefits Of Sinks

  As the name suggests, Stainless Steel Handmade Sink is a sink...أكثر منAs the name suggests, Stainless Steel Handmade Sink is a sink made of stainless steel. The product is processed on the main body by integral stretching or welding, and then formed after surface treatment. It is used as part of the cabinet installation. The final product is used as an indispensable tool in modern kitchens.In terms of price: The stainless steel sink is now basically 304 stainless steel, not to mention the production cost. The current labor cost is very large, and the material itself cannot carry harmful substances to the human body, so the cost is higher.Stainless steel is an ideal material for kitchen water tanks. It is light in weight and easy to install. It is wear-resistant, high-temperature resistant, moisture-resistant, not easy to age, not easy to corrode, non-absorbent, non-absorbent, non-scalable, and non-odorous. The metallic texture has a modern atmosphere, can achieve wild effects, diverse shapes, suitable for various styles, unmatched by other materials.There are classifications...  أقل

  Last post بواسطة عضو محذوف - ٣٠ ديسمبر، ٢٠٢١

  ٨٠٢ views ٠ مثل
  12
• 

  Correct Handling Of Water Leakage In Stainless Steel Faucets

  How to maintain the stainless steel faucet is a big learning,...أكثر منHow to maintain the stainless steel faucet is a big learning, kitchen faucets manufacturers to talk about kitchen faucets manufacturers cleaning method:1, the surface needs to be cleaned regularlyProper use, and then regular cleaning of the surface of the stainless steel faucet can extend its life and keep it as bright as new. It is best to clean the faucet once every other month. The usual cleaning with water can wash away the stains on the surface, and then dry with a soft rag. If the deposited dirt is stubborn, it can also be cleaned with a mild liquefied detergent or a colorless glass cleaner. Do not use acidic, abrasive cleaners to avoid damaging the surface of the stainless steel faucet and affecting the appearance.2. Focus on the internal cleaning of the faucetThe surface of the faucet is cleaned for aesthetics, and internal cleaning is the main factor affecting the service life. If you find that the faucet has a reduced water volume or a water fork, it means that the faucet's bubbler is clogged. At...  أقل

  Last post بواسطة Max Taranov - ١ أكتوبر

  ٧٧٩ views ٠ مثل
  8
• 

  Kitchen Faucets Manufacturers Share Knowledge Of Cleaning Taps

  Usually, when we clean at home, we often ignore many dead...أكثر منUsually, when we clean at home, we often ignore many dead corners in the house, such as small items such as faucets. Then how to properly clean up, the following kitchen faucets manufacturers will share the experience for you.The actual operation of the cleaning faucet is very simple, just need a bottle of white vinegar. The softening effect of white vinegar is very good. White vinegar has been cleaned in many parts of the house. The strong acidity of white vinegar can quickly soften and stain stains. After softening, wipe gently with a rag. The specific method is to use a paper towel to immerse in white vinegar, then cover the vinegar in a dirty place and wait for ten minutes.After ten minutes, remove the paper towel and wipe it off with a slightly hard brush or rag. The scouring pad is also available, and the cleaning effect is very good. This method is ideal for cleaning stubborn stains on faucets. The cleaning effect is low and the cost is low. Interested friends can try it.In fact, in addition to the...  أقل

  Last post بواسطة عضو محذوف - ٤ يوليو، ٢٠٢١

  ٧٤٧ views ٠ مثل
  7
• 

  Kitchen Faucets Manufacturers

  The easy place for the faucet is the valve core, so it is...أكثر منThe easy place for the faucet is the valve core, so it is necessary to master its replacement skills. Once the faucet leaks, it will not only waste water resources, its water droplets and long-term effects on the humidity of the space will be healthy for the family. Then when there is a problem with the faucet spool, how do you change the faucet spool? The following kitchen faucets manufacturers will teach you how to replace it:1. Close the total water valve first.2. Then put a red and blue mark of about 8 mm on the handle of the faucet and buckle it down.3. Use a flat-blade screwdriver to loosen the set screw counterclockwise and remove the handle to expose the spool.4. Use a spanner wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and remove the ceramic valve inside.Faucet spool replacement notes:1. After removing the spool, you will see a blue rubber band on the bottom of the spool. It is customary to have a red eraser at the bottom of the left spool and...  أقل

  Last post بواسطة Max Taranov - ٢٩ سبتمبر

  ٧٩٠ views ٠ مثل
  8
• 

  Kitchen Faucets Manufacturers Share Sink Selection Tips

  Today, follow the kitchen faucets manufacturers to identify the...أكثر منToday, follow the kitchen faucets manufacturers to identify the quality of the stainless steel sink:1, the thickness of the stainless steel sinkGood stainless steel sinks use thicker plates, good quality sinks with imported 304 stainless steel plates and a thickness of 1 mm, while ordinary low-grade sinks use 0.5 mm to 0.7 mm. Since the sink has been edge treated, it is difficult to see the thickness at once. The easiest way is to press the surface of the sink a little bit. If it is pressed down, it means the material is very thin. Of course, if you can borrow the vernier caliper and the spiral micrometer, don't It’s so troublesome.2, the sink surfaceCareful observation of the stainless steel sink, we can find that the surface of the good quality sink is flat, the visual gloss is soft, not easy to stick to oil, easy to clean and wear-resistant. The inner corner of the good quality sink is close to 90 degrees, the inside of the sink is larger, and the volume of the basin is also large.3, stainless steel...  أقل

  Last post بواسطة عضو محذوف - ٤ يوليو، ٢٠٢١

  ٧٥٠ views ٠ مثل
  7
• 

  Kitchen Faucets Manufacturers Share The Role Of Faucet Filters

  Today, kitchen faucets manufacturers to share what is the...أكثر منToday, kitchen faucets manufacturers to share what is the kitchen faucet filter1. Some stainless steel faucets have a filter installed on the head. The filter consists of two layers. When you screw it down from the faucet, you will find a lot of small sand on it. This is the filter. The role of the device, if there is no two layers of filters, sand will directly enter our food, damaging our health. 2. Rotate the faucet to the left to unscrew the filter.3. After the filter is screwed down, take it in your hand and remove the large sand particles. If you can't take it, you can put it on a nearby chopping board or something else and pry off the small sand.4. Rinse under the faucet with water and rinse both sides. After rinsing, use a cleaning ball to wipe off the dirt and dust around the filter, and then take it under the faucet to prepare for installation.5. When installing, align the screws with the screws on the faucet, buckle the faucet, and start to turn to the right. Maybe once.
  information about kitchen...  أقل

  Last post بواسطة عضو محذوف - ٤ يوليو، ٢٠٢١

  ٧٤٠ views ٠ مثل
  7
• 

  Kitchen Faucets Manufacturers

  In the home decoration, there are many owners and friends who...أكثر منIn the home decoration, there are many owners and friends who do not know much about the skills of the old house. The following kitchen faucets manufacturers will introduce you to the tips of decorating old houses:1. Hydropower transformationSince it is necessary to renovate the old house, it is sure to change things all at once. The water circuit of the old house is the most complicated and critical. I used galvanized pipes in this house. I expected all the rust when I opened them. So I changed the main pipe from the main pipe. Although I have not changed the sewer, I have to pay attention. If you want to change it, check if the old pipe is unobstructed and proceed to the next step. After the waterway is completed, don't forget to test the pressure on the water pipe. After I got the waterway, I started working on the circuit again. I didn't know what it was. I was really annoyed when I got it. It was hard to set up the circuit into 3-4 sets of loops that are now routinely used. Small houses, guaranteed to...  أقل

  Last post بواسطة عضو محذوف - ٤ يوليو، ٢٠٢١

  ٧٦٦ views ٠ مثل
  7
• 

  Kitchen Faucets Manufacturers Share The Classification Of Taps

  There are many types of faucets, such as common basin faucets,...أكثر منThere are many types of faucets, such as common basin faucets, bathroom faucets, kitchen faucets, push-type faucets, inductive faucets, washing machine faucets, bubbler faucets, etc.Today, kitchen faucets manufacturers sort out some common faucet disassembly methods:1. Old-fashioned iron faucet disassembly methodPrepare the adjustable wrench, then point the adjustable wrench to the connection between the faucet and the water pipe, then rotate the faucet counterclockwise to disassemble the faucet. This old-style faucet is generally easier to disassemble, and there is no filter element inside. Rotate down in a counterclockwise direction.2, ordinary faucetThis kind of faucet is also a common faucet. If the faucet is to be disassembled, basically connect the hose. This is a conventional screw. You can use a spanner wrench or a fixed wrench to remove the faucet. After the joint is removed, Then remove the front mouth of the faucet. If the faucet wants to continue to disassemble, it is basically the rotating...  أقل

  Last post بواسطة Max Taranov - ٢٦ سبتمبر

  ٧٤٢ views ٠ مثل
  8