منتدى المواضيع

• 

  Specification Of High Temperature Resistant V-belt

  high temperature resistance V-Belt is mainly used in...أكثر منhigh temperature resistance V-Belt is mainly used in metallurgy, construction and other industries to transport high temperature materials such as sinter, coke, cement clinker, etc. The material temperature does not exceed 800℃, and the belt surface temperature does not exceed 220℃. Features: Using EPDM rubber as the covering layer, the skeleton material adopts domestic special high-temperature resistant canvas, and the unique formula design solves the key problems of high saturation of ethylene propylene rubber, poor adhesion, and low interlayer adhesion. . It has the characteristics of light belt body, long life (about 2-4 times) and good heat resistance.
  The implementation of the "Conveyor Belt with Rubber or Plastic Covering Layer of General Purpose Fabric Core Conveyor Belt" standard, this standard adopts the draft international standard ISO/FDIS14890-1999 standard
  The heat-resistant conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton cloth) or polyester canvas covered with...  أقل

  Last post بواسطة Max Taranov - ١٤ يوليو، ٢٠٢٤

  ٤٨٥ views ٠ مثل
  7
• 

  How Does The Triangle Belt Indicate Failure

  What are the main failure modes of the triangular belts,...أكثر منWhat are the main failure modes of the triangular belts, described as follows:
  (1) The belt slips on the pulley and cannot transmit power.
  (2) Delamination, tearing and breaking of the belt due to fatigue.
  (3) Wear of the working surface of the belt.
  (4) Torsional vibration of the driven shaft.
  To ensure that the belt does not slip during work, and has a certain fatigue strength and service life is the main basis for the design of the V-belt, and it is also the main basis for the design of other belt transmissions that rely on friction transmission.
  maintain
  
  When the tension of the triangle tape is checked regularly, the specified requirements cannot be met after adjustment, and a new triangle tape must be replaced. All belts on the same pulley should be replaced at the same time. Otherwise, the load on the V-belt will be unevenly distributed due to the difference between the new and the old and the different lengths. This will cause the V-belt to vibrate, drive unevenly, and reduce the work of the V-belt...  أقل

  Last post بواسطة Max Taranov - ١٤ يوليو، ٢٠٢٤

  ٤٠١ views ٠ مثل
  7
• 

  Selection Of V-belt Model

  Our oil resistance V-Belts are often one of the best-selling...أكثر منOur oil resistance V-Belts are often one of the best-selling products. Rubber belts are afraid of corrosion, so we have produced oil-resistant V-belts, high-temperature V-belts and other characteristic rubber belts, hoping to extend their service life. The following describes the design and concept of the V-belt:(1) V-belts are usually endless belts. To facilitate installation, the shaft spacing and pre-tightening force should be adjusted. For a drive without a tensioner, the bearing position of one of the shafts should be able to move along the length of the belt.(2) The transmission structure should facilitate the installation and replacement of V-belts.(3) For horizontal or nearly horizontal belt drive, the tight side of the belt should be on the bottom and the loose side on the top, which can increase the wrap angle of the small pulley.(4) When multiple V-belts are driven, in order to avoid uneven load distribution of each V-belt, the length of the V-belt on the same pulley should be matched. All...  أقل

  Last post بواسطة عضو محذوف - ٥ يناير، ٢٠٢٢

  ٤٥١ views ٠ مثل
  8
• 

  Transmission Efficiency Of V-belt

  Our main product is the manufacture of rubber belts, among...أكثر منOur main product is the manufacture of rubber belts, among which the triangular belts is one of our products. So what are the advantages and disadvantages of the triangle? How to choose the model?advantage1. Simple structure, low manufacturing and installation accuracy requirements, convenient use and maintenance, suitable for occasions with large center distance between two axles;2. Smooth transmission, low noise, buffering and absorbing vibration;3. When overloaded, the transmission belt will slip on the pulley, which can prevent damage to weak parts and play a safety protection role.Disadvantage1. Can not guarantee accurate transmission ratio;2. Larger outline size, low transmission efficiencyModel selectionThere are seven types of O-type, A-type, B-type, C-type, D-type, E-type, F-type, and the cross-sectional area of ​​the tape from O-type to F-type gradually increases. SPZ SPA SPB SPC These four models are V-belt narrow V type.The choice of tape model is determined by the speed of the delivered...  أقل

  Last post بواسطة عضو محذوف - ٥ يناير، ٢٠٢٢

  ٥٣٥ views ٠ مثل
  8
• 

  High Strength V-Belt-guaranteed

  　　High performance V-Belt structure is easy to manufacture,...أكثر من　　High performance V-Belt structure is easy to manufacture, tensile strength is generally low, is widely used.Some vehicles have multiple camshafts, and some vehicles also have other components that are driven by the high performance V-Belt.And it could cause severe engine damage.Most of the core wires with the common high performance V-Belt use a core and a small amount of thread.
  　　Simple structure, manufacturing installation accuracy is not high, easy to use and High Performance V-Belt.It is suitable for the occasions with larger center distance between two axes.The selection work should be done through measurements, and the identification of the manufacturer code or other marks.Premature worn-out of the high strength V-Belt is usually by improper installation or maintenance.
  　　As a brand product,“Baihua” rubber high strength V-Belt produced by us has the same level as the domestic high quality brand with good value for money.The high strength V-Belt should never be bent with the beads...  أقل

  Last post بواسطة عضو محذوف - ٤ يناير، ٢٠٢٢

  ٤٢٢ views ٠ مثل
  8
• 

  Can Be Used For A Long Time, Can Be High Performance V-Belt

  　　High Performance V-Belts are engineered to run...أكثر من　　High Performance V-Belts are engineered to run maintenance-free to keep your vehicles moving without the need for lubrication or High Performance V-Belt.High Performance V-Belts are made from rubber or synthetic rubber stocks, so they have the flexibility to bend around the sheaves in drive systems.There are many other combinations of High Performance V-Belts available.
  　　High strength V-Belts are made of high performance materials that are resistant to heat and oil.Specially-engineered to deliver maximum boost and performance, these high strength V-Belts feature the most advanced technology.Consistent further development of the production process, High strength V-Belt.  أقل

  Last post بواسطة عضو محذوف - ٤ يناير، ٢٠٢٢

  ٥١٧ views ٠ مثل
  9
• 

  Favorite, Wrapped V-Belts-Good Quality

  　　Nowadays, Wrapped V-Belts are primarily considered for...أكثر من　　Nowadays, Wrapped V-Belts are primarily considered for replacement requirements.Superior Length Stability Means Less Tensioning & Wrapped V-Belts.Thanks to our several decades of good reputation, our Wrapped V-Belts can be used on numerous agricultural or industrial applications.Indeed, new designs will be chosen for more efficient cogged raw edge Wrapped V-Belts.
  　　We can produce various types of cloth belts 3L, SPZ, A, B, C, D, E, 3V, 5V, 8V agricultural belts and joint belt. We have a product development and testing center, which can carry out various regular tests such as rubber vulcanization test, fatigue test, tensile strength test and joint belts.
  　　As professional China Joint Belts Manufacturers and Joint Belts suppliers.Joint belts enable increased efficiency and add to the processing capacity when sorting and processing cut flowers and bouquets.  أقل

  Last post بواسطة عضو محذوف - ٣ يناير، ٢٠٢٢

  ٥٢٤ views ٠ مثل
  9
• 

  Can't Get Bad Joint Belts

  　　The Wrapped V-Belts made with a specially develop high...أكثر من　　The Wrapped V-Belts made with a specially develop high grade elastomer.These belts are made of rubber for oil and heat resistance and long lasting durability.Wrapped V-Belts combine traction with the speed of movement to deliver up to Wrapped V-Belts.
  　　Wrapped V-Belts are the most common type of drive belt used for power transmission.Wrapped v-belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery.Wrapped V-Belts are supplied as classic wrapped v-belts, cogged raw edge belts and timing belts. All our belts are antistatic and oil-resistant.
  　　Joint belts are typically 6-8 inches in width and they are designed to wrap snugly around the hips, in an effort to stabilize the Joint.These allow joint belts to easily to fitted and removed from conveyors.A joint belt is a supportive brace that can help alleviate pain, reduce inflammation and restore function.
  　　Joint belts can be a source of pain when it becomes unstable and moves too...  أقل

  Last post بواسطة عضو محذوف - ٣ يناير، ٢٠٢٢

  ٥٧٠ views ٠ مثل
  9
• 

  Joint Belts-Can't Get

  　　The Wrapped V-Belts made with a specially develop high...أكثر من　　The Wrapped V-Belts made with a specially develop high grade elastomer.Wrapped V-Belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery.These belts are made of rubber for oil and heat resistance and long lasting durability.All our belts are antistatic and oil-resistant.
  　　Wrapped V-Belts are the most common type of drive belt used for power transmission.Wrapped V-Belts are supplied as classic wrapped v-belts, cogged raw edge belts and timing belts.Joint belts are typically 6-8 inches in width and they are designed to wrap snugly around the hips, in an effort to stabilize the Joint.These allow joint belts to easily to fitted and removed from conveyors.
  　　Joint belts can be a source of pain when it becomes unstable and moves too much or in an irregular fashion.Strong ligaments help keep the joint in proper alignment and prevent excessive movement when walking, running, or simply standing.This simple, yet effective device is designed to...  أقل

  Last post بواسطة عضو محذوف - ٣ يناير، ٢٠٢٢

  ٥٤٢ views ٠ مثل
  10
• 

  Wrapped V-Belts-Not Easy To Damage

  　　The Wrapped V-Belts are used worldwide for power...أكثر من　　The Wrapped V-Belts are used worldwide for power transmission. It is economic and widely available in aftermarket.Which provide enhanced strenghth and less flexibility than regular rubber belts.The compounds used at the heart of these belts are well chosen to match the designated power ratings.
  　　The high bearing load when using flat belts can be significantly reduced by using Wrapped V-Belts.Wrapped V-Belts combine traction with the speed of movement to deliver up.Wrapped V-Belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery.
  　　Some people get significant and immediate reduction in pain once the joint belts is properly used, while others only have a minor reduction in pain.But thankfully, there are exercises and support products that can help ease this discomfort.But often times there is some improvement in mobility or strength in the pelvic muscles. These are positive signs that you may benefit from the joint belts.
  　　These...  أقل

  Last post بواسطة عضو محذوف - ٢ يناير، ٢٠٢٢

  ٤٧٥ views ٠ مثل
  10