It's easy to start a car quickly with a portable car quick start kit: connect the plug and the clamp, and start the engine! Just follow the simple steps given below and you're good to go.
Step 1: Preparation
The first thing to do is to charge your portable jump starter. I mean, there is no charge for having one of the best jump starters in your vehicle. After that, another important thing is to store it in your car. Do not leave it in your house or garage. That's because for obvious reasons, you'll need it when you're stuck with a dead battery in the middle of nowhere. For information on storing a portable car jump starter in your car, see the "Caution" at the end.
Step 2: Take precautions and read the user manual
Before you actually start the procedure, be sure to read the user manual that came with your portable jump starter. Make sure you know how the particular model suggested will clamp the crocodile clip and how much voltage will be generated at the output (matching the vehicle's battery voltage-12 volts in almost all cases). If you are standing near any flammable source, do not use a portable car jump starter here. Even small sparks can cause a fire. If possible, we also recommend that you wear protective glasses and protective clothing.
Step 3: Jump from the portable jump launcher
Before connecting any wires to a portable starter or car battery, make sure it is turned off. You also need to determine the positive (+) and negative (-) of the vehicle battery. With this done, you are now ready to start and you can start connecting the fixture to the starter.
First, connect the red crocodile clip to the battery's dead positive (+) terminal, and connect the black crocodile clip to any unpainted nut (or designated ground wire if available) on the car chassis. However, if you cannot connect it to a grounded power source, you can connect it to the negative (-) terminal of a used battery. Next, turn on the portable car jump starter, which will immediately provide high current strength to the waste battery. You can now try to start the car. Try it out, don't shake the engine for more than 5 seconds. If your first attempt fails to start the car: Check that the clip is securely connected to the drained battery terminal and wait about one minute before trying again. Hopefully in the end, you have successfully started your car, long live! Yahoo! You are done. Everything is fine, but now you have to remove the portable Jump Starter.
Step 4: Remove the portable car jump starter
To safely remove the portable jump starter; first close it, then disconnect the black alligator clip from a grounded power source (nut or wire) or the negative terminal of the battery. Then disconnect the red clip from the battery positive terminal. Now store your portable car jump starter safely in your car. We recommend that you let the car idle for a while before you hit the road. In the end, you are all ready to hit the road again. Drive safely and enjoy your trip!
Caveat:
Do not use a portable quick start at high temperatures. Wait for a while to allow it to cool before using it. If even if you wait for a while, the portable charger is still hot and has not cooled down, please do not use it and consider seeking traction service or other help.
Before plugging in the charger, check if the gadget is hot; if the temperature is high, please do not charge it, please wait for it to cool down first.
When opening the quick starter, do not touch the inside of the alligator clip at the same time.
If you find the portable jump starter is inflated, stop using it immediately and dispose of it safely.
Always maintain a moderate, dry temperature.
Ensure that no foreign objects enter the fixture of the portable jump starter.
Most jump starters have a battery level indicator; if the battery level is less than 30%, a quick start is not recommended.
Tips for Jump Start Suppliers: It's important to place a portable car jump starter in a "dry and cool" place inside the car, such as a glove box or luggage. Extreme weather (hot or cold) can shorten the life of a portable jump starter.
Linsheng is a professional Jump Start Manufacturing Company and Jump Start Manufacturers in China.Is a professional manufacturer engaged in the research and development, production, sales and service of automotive parts and power tools. Mainly produces auto parts, emergency lights, quick starters, air compressors, vacuum cleaners, fault lights and spotlights. Our automatic quick starter has multiple safety protection designs to ensure its zero defects, which can achieve high power polymer batteries, fast charging, and low self discharge. Whether you choose current products from our catalog or seek engineering assistance for your application, you can contact our Customer Service Center to understand your purchasing requirements.
https://www.linsheng.com/product/jump-start/