Forum Topics

• 

  Chines Curtain Pole Expert Gives Suggestions

  Hospitals have used the privacy Custom Curtain rod as a...  moreHospitals have used the privacy Custom Curtain rod as a barrier that both protects patients’ dignity and helps the staff to maintain sterile environments by providing in-room barriers between patients during sensitive procedures. That means that they see a lot, and they have to be sturdy enough to stand up to the demands of heavy use. It also means that you will want to make sure that you find the fabric that is best suited to your needs when you are looking for a good resource for your hospital curtain needs.
  Basic Requirements for Hospital Curtains
  At the very least, your curtain needs to be thick enough, heavy enough, and durable enough to deal with these day-to-day challenges.
  Heavy and repeated use by a large number of peopleStains, odors, fluids, and other possible contaminantsDisinfectants, some of which may be mildly caustic or acidicMicrobial attacks, infections, and colonization
  Finding the Right Privacy CurtainIf you are looking for a hospital curtain that can really stand up to the...    less

  Last post by Deleted Member - January 3, 2022

  388 views 0 likes
  9
• 

  Install push fit fitting In A Correct Way

  As with any product, proper installation is critical to...  moreAs with any product, proper installation is critical to accurate performance and reliability. Take care with any type of fitting to ensure generally accepted, good installation practices is also important. There are certain key points to remember, specific to push-in fittings, to ensure a quality installation:
  1. TubingSome push fit fitting limits for use with either plastic or copper tubing. A few can handle both plastic and copper without any change to the fitting. Always check with the manufacturer to ensure tubing compatibility. Ensure that tube dimensions, tolerances, roundness and surface finish are consistent with the manufacturer’s recommendations.
  2. ThreadsMany push fit fittings allow transition from threads to push-in connection. There are various types of threads used such as NPT, NPTF, flare, compression, BSP and BSPT—in straight, tapered, male and female configurations. Again, check the manufacturer’s specifications to ensure correct mating of threads. Also, most plastic threaded...    less

  Last post by Deleted Member - December 28, 2021

  506 views 0 likes
  12
• 

  Types Of Pipe quick fitting

  Types of Pipe quick fitting
  AdaptorBarbCouplingCrossDouble...  moreTypes of Pipe quick fitting
  AdaptorBarbCouplingCrossDouble Tapped BushingElbowMechanical SleeveNipplePlug and CapReducerTeeUnionValveWye
  AdaptorAdaptors connect pipes that are not the same type. Because an adaptor can be male or female on one end, it can turn a pipe male or female.
  Reader Favorites from Water Heater Hub!If ends are non-threaded, they are left to be welded, soldered or glued to the pipe. Adaptors are used for PVC and copper piping.
  BarbA barb connects hoses to pipes. It is usually male at one end. The other has a barbed tube, which is a ridged and tapered cone.
  It may also have a type of clamp to keep it secure. Barbs are made of plastic if they carry cold water and brass if they carry hot water.
  CouplingA coupling makes it easy to connect two pipes that have the same diameter and are the same type. It’s also used to repair a broken or leaking pipe. Along with a normal coupling, two other types are the compression coupling and slip coupling.
  The compression fitting is connected...    less

  Last post by Deleted Member - December 28, 2021

  527 views 0 likes
  13
• 

  Do You Know Benefits Of push fit fitting?

  The main advantage of push fit fitting is how they attach to...  moreThe main advantage of push fit fitting is how they attach to the pipe. As the name implies, all you have to do is push the fitting on the end of the pipe. And with that, you have an instant connection. How is that possible? Inside the fitting are tiny barbs that grab and hold on to the surface of the pipe when it’s pushed on. Since the barbs go in one direction, they don’t allow the pipe to be pulled back out. Also, inside the fitting is a rubber O-ring that creates a watertight seal around the pipe.
  Another benefit of push-fit fittings is that unlike solvent fittings, they can be inserted on a pipe in wet conditions. This comes in handy if you’re repairing a leaky pipe or need to quickly cap a pipe. We should note that you still want to shut off the water supply when installing a push-fit fitting but you won’t have to spend time making sure the surface is 100% dry like you would if using glue.
  Finally, push-fit fittings can be used to join PVC, copper, and other types of plumbing pipes. So...    less

  Last post by Deleted Member - December 27, 2021

  533 views 0 likes
  13
• 

  Try To Know pp fitting Challenge

  The pp fitting Challenge held by the Pipeline Construction...  moreThe pp fitting Challenge held by the Pipeline Construction Association (RBV)and the German Technical and Scientific Association for Gas and Water (DVGW) focuses on the generation of new talent. Due to the skills shortage, increasingly specialized sectors are now competing with each other for capable young talent. The pp fitting Challenge presents the advantages and potential of the pipeline construction sector on the platform provided by the World's Leading Trade Fair for Water, Sewage, Waste and Raw Materials Management.
  The sporting competition offers participants and visitors insights into the varied and interesting professions in pipeline construction. It clearly shows how attractive the job profiles and how exciting the activities in pipe fitting are. This field of activity is a promising alternative and a future-proof choice with excellent development options for every young person now choosing a career.
  For young people who are about to choose a career, it is a chance to learn about the job...    less

  Last post by Deleted Member - December 27, 2021

  549 views 0 likes
  13
• 

  push fit fitting Can Be Installed In This Way

  Plumbing system repairs and remodeling projects require a lot...  morePlumbing system repairs and remodeling projects require a lot of time and money - not to mention the vast amount of tools required for soldering, crimping, and joining materials. There is, however, another option: Whether it is repairing a plumbing system or completing a plumbing remodeling project, you can easily take care of it faster and more cost effectively with push fit fitting. The push fit fitting offer an easy-to-use and fast solution for any potable water repair or remodeling project using copper, PEX, or CPVC tubing.
  With a small and lightweight design, push fit fitting make it easier to install in tight spaces with no solder, crimping, joining material, or special tools needed. They are the easier, faster, and smarter choice.
  How do they work? I'm glad you asked. Follow these simple steps to install push fit fitting!
  Step 1: Turn your water off using the main shut-off valve and gather your supplies...
  Tools you need may include the following:a clean, undamaged tubetube cutter or fine...    less

  Last post by Deleted Member - December 27, 2021

  540 views 0 likes
  13
• 

  These Questions Of quick fitting Help You Know More

  What is the difference between a male and a female quick...  moreWhat is the difference between a male and a female quick fitting? The only thing that separates a male fitting from a female fitting is where the fitting thread is located. On a male fitting, the thread is located on the outside, while it is located on the inside for a female fitting, .
  The water treatment industry uses several other terms to describe fittings, like connectors and adapters. The terms connector and adapter really mean the same thing. If you want to be specific though, an adapter is typically a fitting that changes venue. On one end, there is a thread connection, and on the other, there is a stem adapter. However, they both are still connectors. The threaded side connects to other threads, and the stem side connects to tubing.
  What makes a quick fitting watertight?As long as your quick fitting are not subject to environments with excessive vibration or movement, they should always stay in place. The O-ring inside of a quick fitting usually remains in good condition for a long time,...    less

  Last post by Deleted Member - December 27, 2021

  573 views 0 likes
  14
• 

  The Way To Use quick fitting

  Because so many water ionizer customers have a hard time with...  moreBecause so many water ionizer customers have a hard time with understanding how a quick fitting works, I’ve done a little video to show it to you.
  The Following shows the steps:
  Remove a hose or plug from a quick fitting
  Pull back on the little movable ring [by the hole of the quick fitting
  With your other hand pull out the hose.
  Insert a Hose into a quick fitting
  Make sure the hose has a nice, 90-degree, straight cut
  Insert the hose into the quick-connect as far as you think it can go
  Then pull on the hose to make sure it won’t pull right out
  Finally push once more until you are sure it is well seated into the fitting.
  The above shows the steps on how to use quick fitting. You can read it carefully and try to use it. If you have any problems, you can contact us! Thank you for your reading!  less

  Last post by Deleted Member - December 27, 2021

  523 views 0 likes
  14
• 

  The Preferred Reasons And Use Of push fit fitting

  Push in pneumatic fittings are growing in popularity, and are...  morePush in pneumatic fittings are growing in popularity, and are easy to find in home improvement stores and hardware centers nowadays compared to traditional PVC, CPVC or sweat soldering copper pipes. These fittings are remarkably popular because of their ease of use and the fact that they require very little skill or important specialist knowledge to operate. The fact that no hazardous solvents are required for use is also a big reason for their increased adoption.
  These fittings have a series of metallic spurs in the fittings that provide a tight grip to pipes when they are inserted into their respective fitting sockets. This firm grip on the pipes is crucial in maintaining stability and ensuring pipes don’t slide out of place. Push fit fittings are your best bet when making joints for a new installation using copper pipes, CPVC or PEX since Neoprene O-rings inside the fittings form tight waterproof seals against the installed pipes.
  Despite being manufactured under various brand names, two of the...    less

  Last post by Deleted Member - December 27, 2021

  502 views 0 likes
  13
• 

  We Should Save Installation Time Of push fit fitting

  14 things you can do with the 14 hours you’ll save if...  more14 things you can do with the 14 hours you’ll save if you’re using our push fit fitting
  We all know that a plumber’s time is precious and some days, there just aren’t enough hours in the day to get done everything you had planned. That’s why push fit fitting are such great tools, reducing installation times by around 40% when compared to traditional fixing methods.
  To apply a push fit, you simply push the fitting fully onto a pipe, and twist the plastic nut clockwise to lock into place – it’s that quick! And if you need to demount the connection, you just unlock the nut and push the collet towards the body of the fitting, and pull the pipe to release.
  If every plumber used fittings, the industry would be saving 40% of time every day – that’s the equivalent of 14 hours in every 35-hour week. To put that into perspective, we looked at some of the things you could be doing if you had an additional 14 hours of free time every week.
  1. Fly from Manchester to Sao Paulo
  The fastest one-stop...    less

  Last post by Deleted Member - December 27, 2021

  583 views 0 likes
  14