Groups

• Mold Release Agent Suppliers

  1 member

  Mold Release Agent Suppliers introduces how to use mold release agent: 1. Thoroughly clean the mold with suitable cleaning water to remove the previous residual release agent and other contaminants, and then wipe the water with a clean cloth. 2. Please shake the bucket before use. If there is precipitation, it will not affect the effect after shaking. 3. Air-assisted spraying equipment can be used, or it can be wiped with a brush and cotton cloth. 4. On the pretreated clean mold, wipe the mold with paint once. The release agent completely covers the mold to form a strong film. 5. Just after spraying the air gun, the release agent can also be blown off. After the concentrated liquid release agent has evaporated, it can be coated in a mold or directly filled. 6. The dilution factor of the release agent should be determined according to the complexity of the product, the density of the solvent used and the actual operation. 7. The general dilution of the concentrate is 10 to 15 times. 8. It is recommended to use the corresponding release agent solvent for the dilution solvent. https://www.silways.com/application/mold-release-agent.html
• Use Details Of Mold Release Agent

  1 member

  Mold Release Agent is a functional substance between the mold and the finished product. The release agent is chemically resistant and will not be dissolved when it comes in contact with the chemical components of different resins (especially styrene and amines). The release agent also has a heat resistance and stress properties, and is not easy to decompose or wear; the release agent adheres to the mold and does not transfer to the processed part, and does not interfere with painting or other secondary processing operations. Due to the rapid development of injection molding, extrusion, calendering, molding, laminating, and other processes, the amount of release agent has also been greatly increased. The release agent is an interface coating used on the surface of two objects that are easy to adhere to. It can make the surface of the object easy to peel off, smooth, and clean. It is widely used in metal die-casting, EVA products, rubber products, plastic products, silicone products, cement products, polyurethane foam and elastomers, glass fiber reinforced plastics, injection molding thermoplastics, vacuum foaming sheets, and extrusion profile fillers Such as plasticizers, etc. will ooze out to the interface, then a surface remover is needed to remove it. Theoretically, the release agent has greater tensile strength, so that it is not easily polished when it is in frequent contact with the molded resin. This is especially true when there are frosted mineral fillers or glass fiber reinforcements in the resin. The release agent is chemically resistant and will not be dissolved when it comes in contact with the chemical components of different resins (especially styrene and amines). The release agent also has a heat resistance and stress properties, and is not easy to decompose or wear; the neutral release agent adheres to the mold and does not transfer to the processed part, and does not interfere with painting or other secondary processing operations. www.silways.com
• Hexamethyldisiloxane Manufacturer

  1 member

  Hexamethyldisiloxane Manufacturer introduces the difference between waterproofing agent and waterproofing powder Waterproof coating is a type of emulsion type waterproof coating, solution type waterproof coating, and transparent colorless waterproof coating. It is suitable for cement mortar, concrete, textile products and other materials. It is a new type of building waterproof material at this stage. It can be used for waterproofing of roofs, toilets, walls, cement components and road surfaces. It has the advantages of long service life, low price, environmental protection and no pollution. The raw material of the waterproof powder is selected organic silicon material silane waterproof coating and silicon dioxide. After adding silica and the organic silicon material silane waterproof coating solution, they are dried into waterproof powder. Usually suitable for cement mortar, cement components, concrete roof waterproofing, floor waterproofing, etc. It has the advantages of no dust, zero pollution, strong reliability and strong waterproof characteristics. In addition to the difference in raw materials and application categories, the appearance is also very different. One is liquid and the other is powder. The liquid Zibo waterproofing agent belongs to the type of permeable crystal, and the powdery waterproofing powder belongs to the active ingredient. Therefore, the two types are building waterproof materials in different states. Secondly, there are many large-scale manufacturers producing waterproof coatings and waterproofing powders, so waterproofing coatings and waterproofing powders will differ in materials, formulas and results, and addition amounts. Since the two have any differences except for these, both belong to building waterproof materials, and both have excellent waterproofing uses.
• HZ SILWAYWishes Everyone A Smooth Career

  1 member

  When Christmas is coming, HZ SILWAY everyone a happy life and a smooth career. Sweet love words-intoxicated, infatuated company-sincere, gentle greetings-intimate, deep blessings-warm heart, Christmas is coming again, deep blessings gently sent, wish HZ SILWAY's blessings will always be with you! Hangzhou Silway New Material Technology Co., Ltd. Founded in2014, is a young but fast-growing company specialized in the research, development, production and marketing of silicone chemicals. Silway focused on the modified siloxane and formulation technology, product line covers from agricultural silicone adjuvant, silicone water repellent, cosmetic silicones, sealant&additive, modified siloxane for die-casting.etc. Welcome to visit the company's official website to learn more www.silways.com
• Advantages Of Peg-12 Dimethicone

  1 member

  Features of PEG-12 Dimethicone : 1. Heat resistance Silicone oil has very excellent thermal stability to thermal oxidation. 2. Cold resistance Silicone oil has very excellent cold resistance. The cold-resistant benzyl silicone oil has good fluidity even if the temperature is as low as -65°C. 3. Viscosity stability The viscosity of silicone oil changes very little, in a wide humidity range from low temperature to high temperature. The above content is organized and shared by 1,3,5,7-Tetramethylcyclotetrasiloxane Manufacturers, hoping to help those in need.