ACTIVATED CARBON » Discussions

Alumina Ceramic Foam Filters are available in all common sizes

• x l

  

  Member
   

  July 6, 2022

  Alumina Ceramic Foam Filters mainly for filtration of aluminum and aluminum alloys in foundries and cast houses . With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit. 　　
  
  

  Physical Properties for Alumina Ceramic Foam Filters

  
  

  
  
  
  
  Working Temp
  ≤1200°C
  
  
  Porosity
  80~90%
  
  
  Compression Strength (Room Temperature)
  ≥1.0Mpa
  
  
  Volume Density
  ≤0.5g/cm3
  
  
  Thermal Shock Resistance
  800°C to room temperature 5 times
  
  
  Application
  non-ferrous and alumina alloys, high temperature gas filter, chemical fillings and catalysis carrier etc.
  
  
  
  

  
  

  Chemical Composition for Alumina Ceramic Foam Filters

  
  

  
  
  
  
  Al2O3
  SiC
  SiO2
  ZrO2
  Others
  
  
  85% approx
  —
  6% approx
  —
  9% approx
  
  
  
  

  
  

  
  
  • We offers the whole range of porosities from PPI 10 up to PPI 60 (PPI = pores per inch).
  
  
  • Alumina Ceramic Foam Filters are available in all common sizes:7”x7”x2”, 12”x12”x2”, 15”x15”x2”, 17”x17”x2”, 20”x20”x2”, 23”x23”x2”.Other sizes can be customized upon request.
  
  
  • At present, we preserve 30 manufacturing kilns, our alumina ceramic foam filters capacity ranked No.1 in China and exported to more than 40 different countries.
  
  

  Alumina [url=http://www.aluminum-casting-filter.com/10-50ppi-alumina-ceramic-foam-filter/]Ceramic Foam Filters[/url] mainly for filtration of aluminum and aluminum alloys in foundries and cast houses . With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit. 　　

  [b]Physical Properties[/b][b] for Alumina [url=http://www.aluminum-casting-filter.com/10-50ppi-alumina-ceramic-foam-filter/]Ceramic Foam Filter[/url]s[/b]

  [b]Working Temp[/b] ≤1200°C [b]Porosity[/b] 80~90% [b]Compression Strength (Room Temperature)[/b] ≥1.0Mpa [b]Volume Density[/b] ≤0.5g/cm3 [b]Thermal Shock Resistance [/b] 800°C to room temperature 5 times [b]Application[/b] non-ferrous and alumina alloys, high temperature gas filter, chemical fillings and catalysis carrier etc.

  Chemical Composition for Alumina [url=http://www.adtechamm.com/how-to-make-ceramic-foam-filter/]Ceramic Foam Filter[/url]s

  Al2O3 SiC SiO2 ZrO2 Others 85% approx — 6% approx — 9% approx

  • We offers the whole range of porosities from PPI 10 up to PPI 60 (PPI = pores per inch).
  • Alumina Ceramic Foam Filters are available in all common sizes:7”x7”x2”, 12”x12”x2”, 15”x15”x2”, 17”x17”x2”, 20”x20”x2”, 23”x23”x2”.Other sizes can be customized upon request.
  • At present, we preserve 30 manufacturing kilns, our alumina ceramic foam filters capacity ranked No.1 in China and exported to more than 40 different countries.