Forum » Off-Topic » Off-Topic Discussions » Use of Environmentally Friendly Polyester Plasticizers

Use of Environmentally Friendly Polyester Plasticizers

  • Precautions for the Use of Environmentally Friendly Polyester Plasticizers

    The use of environmentally friendly polyester plasticizers requires careful attention to several key considerations. These plasticizers are regarded as green, safe, and biodegradable additives suitable for the production of various plastic products. Their notable features include low volatility, high degradability, and excellent heat resistance. Compared to traditional additives, the use of eco-friendly plasticizers effectively reduces VOC emissions during production, enhances production efficiency, and is more environmentally and human-friendly. When using YL Environmental plasticizers, it is essential to observe the following guidelines:Get more news about Polyethylene Wax,you can vist our website!

    1. Storage conditions: Environmentally friendly polyester plasticizers should be stored in a dry, well-ventilated, and light-proof environment, avoiding high temperature, humidity, and direct sunlight. Meanwhile, ensure sealed storage to prevent volatilization and moisture absorption.

    2. Operational safety: In the process of handling and operation, protective gear should be worn, such as gloves, goggles, and so on. Avoid direct contact with skin and eyes. In case of inadvertent contact, flush immediately with plenty of water and seek medical assistance.

    3. Proportion control: Reasonably control the amount of environmentally friendly polyester plasticizer added based on actual needs and product performance. Adding too much or too little may affect the performance of plastic products. When using, you can refer to the product manual or professional advice for mixing.

    4. Mixing evenly: When adding the environmentally friendly polyester plasticizer to the plastic raw materials, ensure full mixing to fully exert its plasticizing effect. During the mixing process, a high-speed mixer and other equipment can be used to ensure uniform mixing.

    5. Performance Monitoring:After using environmental polyester plasticizers, the performance of products may change. In the production process, we pay attention to the mechanical properties of the products, weather resistance, heat resistance, and other aspects of the performance to ensure the quality and service life of the products.

    6. Environmental requirements: When using environmentally friendly polyester plasticizers, relevant environmental regulations should be followed to ensure that the impact of the product on the environment is minimized. At the same time, paying attention to the disposal of waste to avoid pollution of the environment.

    7. Storage period: Under the specified storage conditions, the validity period of environmentally friendly polyester plasticizer is generally within one year after opening. During use, pay attention to the shelf life of the product and avoid using expired products.

    8. Fire-fighting measures: In the event of a fire, environmentally friendly polyester plasticizers may produce toxic smoke. Therefore, ensure the production workshop is equipped with comprehensive fire-fighting facilities, and take appropriate measures to ensure the safety of personnel.

    In short, when using environmentally friendly polyester plasticizers, pay attention to the above precautions to ensure good product performance while ensuring production safety and environmental protection.

      January 1, 2024 1:17 AM MST
    0