1. Fully understand the characteristics of solar lights manufacturer' lights, light sources and light poles. According to the actual and referenced lighting standards of roads, and in combination with the investment budget, reasonably select solar lights, light sources and light poles so as to give full play to the advantages of high efficiency and energy saving of light sources, the light distribution of solar lights and combination of accessories.

2. Under the condition of ensuring lighting performance, properly increase the spacing of solar lights to save the number of lights; The height of the solar light pole should be appropriately raised to improve the lighting effects. As far as possible in the middle of the road partition belt cloth rod, in order to save engineering costs.

3. In combination with road engineering, timely and early intervention in pole position selection, foundation construction and pre-burying, so as to discover problems in time, make reasonable changes, ensure quality and save investment.

4. According to the actual and geological conditions of the solar light project site, design and manufacture the solar light pole foundation and the high pole light foundation to ensure the foundation is firm and reliable. Special attention should be paid to the matching of the embedded bolt with the reserved hole of the rod seat, accurate positioning, reasonable embedded length and reserved length, and proper protection of the threaded part to facilitate hoisting and positioning.

5. It is difficult to meet the requirements for decentralized grounding and sectional grounding in rock strata and fossil wind sections. Conductors such as galvanized flat steel can be considered for long-term connection according to the design requirements. The connection should be reliable, with appropriate protective treatment at the same time and reliable connection with the embedded foundation to ensure reliable connection between each light pole and the ground.

6. Hoisting operation must strictly abide by the operating rules. Special attention should be paid to the power grid lines and other lines around the hoisting equipment, as well as the surrounding structures. The hoisting points should be reasonable during hoisting and adjusted in time after positioning.

7. Pay attention to the beautiful appearance of the solar light post after installation. Starting from the foundation construction, the light level shall be controlled in a straight line based on the mainline, and the line shape shall be changed reasonably according to the road design. The light pole shall be straight and straight, and the welding seam and access opening shall be processed to avoid the mainline direction, and the whole line shall be kept consistent.

8. Plug-ins for internal fittings of solar lights and lanterns shall be tightly inserted and fastened to avoid faults caused by loose wind swing and poor contact.

For more product details, please click on our official website: https://www.nbloyal.com/