Streetlights are the basic basic package for road safety and can ensure traffic safety. They are related to happiness and the reduction of unfortunate events. At present, the street lamp produced by the Led Street Light Factory is a kind of led equipment used for outdoor lighting, mainly composed of capacitors, resistors, transistors and MOS tubes, and its basic composition makes it common in many components.

In addition to those mentioned above, it also has the fact that it does not contain mercury that is harmful to the planet and our health, and is more convenient in terms of ecological treatment. The LED street lamp has become more secure, in addition, it can operate stably under low pressure. In addition, LED street lights have a better visual experience, a longer service life, about 100,000 hours, and more energy-saving and higher light efficiency.

Therefore, the transformation of LED street lights is getting faster and faster. In terms of retrofitting, manufacturers of retrofitting and replacing LED street lights in HID and HPS are easy to install and can achieve fast adjustable LED lighting without any problems.

LED street light transformation

What situations can be considered in the transformation of LED street lights
Generally, the conditions for replacing lamps are mainly because the life of the existing bulb has reached a critical point. First of all, the existing LED street lamps will produce more energy loss, the appearance is old, which will affect the beauty of the city. Secondly, it is not compatible with the kit to be replaced and parts cannot be replaced separately. Third, we no longer live in the world. MHL and HID lamps have no energy-saving points, no intelligent control system, and no unified management function, so that they can not keep up with the pace of society. Finally and most importantly, today, the design of this lamp is people-oriented and advocates environmental protection, which is impossible for traditional lamps. Only new modern LED lights can meet the relevant requirements. Therefore, considering these factors, more and more countries will begin to transform LED street lights.
How to choose the right and perfect LED street light
It is a wise choice to transform LED street lights, because traditional lamps are not only expensive but also inefficient. Nowadays, LED lamps dominate the lamp market, so the demand for LED street lamps is greater. Due to the increase in demand, manufacturers have also greatly increased, so fraud has also increased. Therefore, you need to keep a clear head when buying LED street lights.
Please keep in mind that if you make a mistake, you will pay more for the cost and energy, because indoor lighting is different from indoor lighting, so more installation work is needed, so reducing unnecessary installation costs is also particularly important in the LED street lamp transformation .
In order to choose a suitable and perfect led street light, we need to consider its quality factors.
1. Power supply: protection ratio and intelligent technology
Let us discuss how the driver and the entire structure influence you to make the right decision.
LED street lights are used in outdoor environments, so power conditions are critical, especially in Southeast Asia. The power supply must resist harsh electrical conditions, such as lightning strikes during the rainy season, so the power supply must have good surge protection and high voltage protection, otherwise it may fail at any time.
The following are the quality factors of high-quality power supply:

l Minimum 10KV surge protection

l IP66 protection grade

l Ground connection with surge protection.

l Overcharge protection, over discharge protection, over current, short circuit protection.

l The power supply can be easily replaced from the field without any tools, and can also be removed from the pole.

l Adopt isolated drive solution.

2. LED street light structure:
Maybe you will wonder why LED chips are not the most important. In fact, if you choose the best power supply, the LED chip will theoretically have an unlimited lifespan, because the LED chip is solid-state hardware, and its efficacy will decrease over time. There are many outdoor lights, especially led street lights, and their own bad structure will damage them, but this is not the only factor, there may be more reasons, here are some examples:

l Waterproof grade does not meet the standard requirements

l No radiator anti-corrosion coating

l The compressive strength of lamps is insufficient

l The quality of the waterproof rubber ring is not good

A good LED street light structure must have the following qualities

l Corrosion-resistant coating

Professional secondary optical lenses

l IP66 and IK08 protection levels

l Sturdy appearance, can prevent typhoon and other weather

l Use outdoor special stainless steel screws and other bare accessories

l Aluminum alloy material is chemically treated to prevent rust