What kind of process is the LED street lamp installation process, how to correctly install the street lamp, what relevant attention details need to be paid attention to in this process, the following Led Street Light Housing supplier will organize for you, related matters about the correct installation of LED street lamp . Low maintenance cost of LED street lamps: Compared with traditional street lamps, the maintenance cost of LED street lamps is extremely low. After comparison, the total input cost can be recovered in less than 6 years. LED street lights have automatic control energy-saving devices, which can achieve the maximum possible power reduction and energy saving when meeting the lighting requirements of different periods. It can realize humanized functions such as computer dimming, time control, light control, temperature control, and automatic inspection.

When installing LED street lights, we need to pay attention to the following details:

1. The installation height, elevation angle and direction of lamps and lanterns between adjacent street lamps should be consistent.

2. The longitudinal centerline of the LED lamp device and the longitudinal centerline of the lamp arm should be consistent. The horizontal line of the lamp should be parallel to the ground. After tightening, check visually that there should be no tilt.

3. The connection between the lamp holder and the lamp post must be strictly regulated.

4. LED street lamp arm, lamp board and lamp post shall not have joints, perforations or nozzles shall be smooth and free of burrs, and insulated shells or bandages shall be used. The length of the bandage shall not be less than 200 mm.

5. All kinds of nuts are fastened, and washers and spring pads should be added. The distance between nuts after tightening shall not be less than two.


The above content is organized and shared by LED Street Light Housing | Die-cast Aluminum Light Housing ,hoping to help those in need.