This website uses cookies to ensure you get the best experience on our website.
To learn more about our privacy policy Click here Many people buy a new Manual Seeder. Many times they need to assemble it by themselves. They need to be disassembled for maintenance. Next, I will introduce how to disassemble and repair the Manual Seeder:
1. Clean the site and machinery. The working environment of Manual Seeder is muddy, so when the Manual Seeder is faulty, choose a clean site, clean the machine and repair it, otherwise, dropping a small component may cause a missed operation.
2. Tool preparation and selection of Manual Seeder. There are many parts of this kind of machine that must be disassembled and assembled with special tools, otherwise it is easy to be damaged and must not be disassembled by force. So choose the right tool and be prepared.
3. The principle of Manual Seeder disassembly: assembly first, then parts, and the pieces are placed in order. At the same time, pay attention to the mark, gap, direction and the return of the screw. If necessary, you can use a pen to make a mark or record.
4. Analyze the cause of the failure of the Manual Fertilizer Seeder. All failures must have causes. Find out the cause, cure the root cause, and cure both the symptoms and the root causes. Otherwise, greater losses may be caused.
5. Assembly. Clean all the accessories and assemble them in the reverse order of disassembly. There is not much last one, but not one.