Kitchen decoration can be described as an important part of home improvement. Every step must be carefully handled. The installation of stainless steel sinks and the installation of stainless steel sinks are not in place, which will cause a lot of trouble and affect the whole home life. Xiaobian collected some knowledge about the installation of Stainless Steel Kitchen Sink and hopes to help you.
Prepare before installing the stainless steel sink
The installation of the stainless steel sink is usually installed after the countertop is installed. That is to say, the installation of the sink is carried out a few days before the completion of the renovation, mainly to avoid causing certain damage after installation.
First, open the package, remove the sink body and drain assembly, and check that the accessories are correct and complete.
Remove the sink and follow the opening template in the box to make the opening of the countertop. Check if the muffler block is degummed. If it is, please re-apply it.
Check whether the faucet is cracked at all parts, whether the sealing ring at both ends of the connecting pipe is missing, misplaced, damaged, etc., so as to avoid water leakage after installation.
Stainless steel sink installation
The drain of the sink must be left in the sink cabinet, and the angle valve should be installed before installing the sink. In order to avoid damage to the outer surface of the faucet during the installation of the faucet, the faucet sleeve or faucet plastic bag should be placed on the faucet to install the faucet.
When connecting the hot and cold water pipes, facing the faucet, the left end is connected to the hot water pipe, and the right end is connected to the cold water pipe.
When installing the bellows or braided tube, be sure to pay attention to the tightening force. If it is too large, it will easily damage the thread. If it is too small, it may leak due to the seal.
After the installation is completed, the water supply of the stainless steel sink is adjusted.
Tip: Regarding the opening size of the stainless steel sink, the opening size of the stainless steel sink is generally 2cm-2.5cm for the outer diameter of the sink, and the angle R of the opening of the stainless steel sink is very important. Finally, if the two slots are installed, it is recommended that you use the two sinks alternately to ensure that the sink is not blocked or leaking.