Today, what are the common reasons why Vibratory Finishing Machine manufacturers share vibration motor damage?

1. If the lubricating oil is insufficient, aging or excessively added, the lubricating oil should not exceed 70% of the bearing cap and bearing volume.

2. There is iron powder and other impurities inside the lubricating oil, or the oil ring inside is stuck.

3. No installation is in place. For example, bearings, the bearing caps are not assembled, or too tight between them. Concentricity is not right, there is eccentricity causing damage.

4. The coupling level is not adjusted well. The chain or belt between the transmissions is too tight, and the shaft is subjected to load force impact deformation.

5. the bearing quality is not good, the bearing clearance is too small or too large.

6. the vibration motor start and stop frequency is too high, and the rigidity is too large, for some occasions should not be full pressure start, soft start will be better.